Bobcat t200 traction lock solenoid harness location

[Septic man mike]

Hello everyone new to the forum. I have a bobcat t200 enclosed cab hand foot control it was a basket case machine finally got it running and cannot find were to plug the traction lock solenoid into the harness there are no hacked up wires on this machine not sure if its missing a (sub) harness. I believe this is about the same machine as a 864 everything else seems to work fine other than I cannot move the machine due to traction lock solenoid plug in any help would be great thanks

 

[Txhayseed]

Ehhh. ? Track lock soleniod on a T200 ? You have a brake lock valve with a brake lock soleniod.. Is that what your referring to ? How old is your machine ?? Do you got the knob on your brake lock valve? The wire should be right there. There isn't much slack in harness for it to be far off

 

[frg]

Hello everyone new to the forum. I have a bobcat t200 enclosed cab hand foot control it was a basket case machine finally got it running and cannot find were to plug the traction lock solenoid into the harness there are no hacked up wires on this machine not sure if its missing a (sub) harness. I believe this is about the same machine as a 864 everything else seems to work fine other than I cannot move the machine due to traction lock solenoid plug in any help would be great thanks

look under the cab, right side of loader. some where near in front of emergency lowering boom knob. there is park break solenoid and valve.