Before I pay $450.00 for a seat from ASV does any one know what the seat bolt pattern is so I can buy an aftermarket seat for less $$. Otherwise I will have to remove all the AC parts under the cab floor to measure and the machine will be down while I wait on another seat.
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
ASV RC85/100 seat bolt pattern
- Thread starter f311fr1
- Start date
daveyclimber
Well-Known Member
They are a very generic seat. Personally I'd pull the panel and remove the seat. Get a nicer seat and Redhill pattern if necessary. Crappy vinyl cracks quickly. Watch the headroom if using a different seat.
the seat does fit and bolt up using stock bolt pattern. To use the seat switch you will need to hole saw a hole in the metal pan that the seat bolts to to utilize the round cut out in the seat for the switch. The seat is much firmer than the old one and does provide some lower back support.