powerjoke
Senior Member
- Joined
- Aug 2, 2009
- Messages
- 1,125
- Location
- Missouri
- Occupation
- owner/operator/estimator/mechanic/grunt/ditchdigge
well, one of my older machines has a drive issue,
It only travels about 1/3 speed. and in forward it will not track straight. so i pulled the codes up on it and we have a
132.4, 134.6 and a 168.? and the book shows a drive solonoid circuit high possible short, and the other is right forward mechanical not responding to computer. (or something like that) and I couldnt find the third one.
If it was a non computer controlled machine i would guess that the drive motor or pump was going weak and the crossover valve was compensating for it. what do you all think?
oh' I priced a drive motor just for the helluvit ,.......$10grand
Pj
It only travels about 1/3 speed. and in forward it will not track straight. so i pulled the codes up on it and we have a
132.4, 134.6 and a 168.? and the book shows a drive solonoid circuit high possible short, and the other is right forward mechanical not responding to computer. (or something like that) and I couldnt find the third one.
If it was a non computer controlled machine i would guess that the drive motor or pump was going weak and the crossover valve was compensating for it. what do you all think?
oh' I priced a drive motor just for the helluvit ,.......$10grand
Pj