Bootheal
Senior Member
I’m not getting a good picture of the vertical 6x6’s but I’m fairly dense in the thinking department.
On of my ideas was to put a rebar or rod through the open conduit, sticking out both sides. Place a plate drilled for the rods, over the rods and weld a washer to keep it all together.
There’s a few issues with this idea:
The blocks need to be in the water.
There’s going to be movement from waves off and on, so I need to keep a cushion between the blocks.
I have 8’x8’ and 4’x8’ blocks.
Was told, until they are grouped together, the 4’x8’ blocks are top heavy and will flip in the water!
On of my ideas was to put a rebar or rod through the open conduit, sticking out both sides. Place a plate drilled for the rods, over the rods and weld a washer to keep it all together.
There’s a few issues with this idea:
The blocks need to be in the water.
There’s going to be movement from waves off and on, so I need to keep a cushion between the blocks.
I have 8’x8’ and 4’x8’ blocks.
Was told, until they are grouped together, the 4’x8’ blocks are top heavy and will flip in the water!