2005kes2005
Active Member
Can the seals on the 1st gear cluster
be changed without Re & Re the whole Tranny
Seals by passing in 1st gear only
thanks
M
be changed without Re & Re the whole Tranny
Seals by passing in 1st gear only
thanks
M
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
966c trany seals
- Thread starter 2005kes2005
- Start date
Diagonal Brace
Well-Known Member
May as well change them all.
Nige
Senior Member
I certainly wouldn't go in there to do piston seals on one clutch out of 5........
kshansen
Senior Member
- Joined
- Mar 11, 2012
- Messages
- 11,180
- Location
- Central New York, USA
- Occupation
- Retired Mechanic in Stone Quarry
No way! Actually have to remove the radiator then engine and trans. as an assembly. Been a few years but don't think it is possible to just pull trans.
As I recall not a bad job if you have a crane of some kind that can do the lifting. I have done it with a beam mounted in the bucket of a 175 Michigan loader! But you really need to have an operator you can trust with your life one wrong move and that's all she wrote!
966C trans. is one of the easiest to work on out there.
Good luck.
As I recall not a bad job if you have a crane of some kind that can do the lifting. I have done it with a beam mounted in the bucket of a 175 Michigan loader! But you really need to have an operator you can trust with your life one wrong move and that's all she wrote!
966C trans. is one of the easiest to work on out there.
Good luck.