texaschad25
Well-Known Member
I'm looking for a set of engine screens for my 68 D7E 48A with the D339. Thanks.
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
68 D7E engine screens
- Thread starter texaschad25
- Start date
d9gdon
Senior Member
Kenco Mfg. in Atoka OK makes a good set. I think around $800 10 years ago. I go by there weekly and could pick them up for you because I go by Grandview weekly too.
http://www.kencomfg.com/products/view/engine-enclosures/catepillar
http://www.kencomfg.com/products/view/engine-enclosures/catepillar
texaschad25
Well-Known Member
I called about a year ago and they were $1200. I may wind up taking you up on the offer Don. I owe you lunch for your help with my injectors!
d9gdon
Senior Member
I had a set on my D7E. I liked them real well.
texaschad25
Well-Known Member
Did you get them from Kenco?
d9gdon
Senior Member
Yes I did. If you get them, you may have to flip the hydraulic lines on top of the lift cylinders' quick drop valves. It's not any big deal, you just rotate them 180 degrees if I remember right. They will then stick out a little further but it's a price you pay to have engine enclosures.