624H Trans goes to neutral when operating, with a bang/thud.

[William Rushbrook]

When operating unit looses gears. Sets trans fault, turn off and restart unit and works again. How can i get the trans faults?
DW624H571309
16,600 HRS
Fluid is full and clean, no leaks no other concerns at this time.

 

[mg2361]

Press menu button until "d" is displayed. Press select and then it should show "d01". Press select and then a code should be displayed. Press next to scroll through all the codes. Post them. Pictures would be better.

 

[William Rushbrook]

Ok fellas... here they are. I did take pics and can upload later today.
F
1099
0588
0364
1664
0363
0362
1661

 

[mg2361]

F1099 Service Brake Pressure Low
F0588 Engine Coolant Level Low
F0364 First Speed Clutch Pack Solenoid Short-to-Power
F1664 Brake Light Pressure Circuit
F0363 First Speed Clutch Pack Solenoid Short-to-Ground
F0362 First Speed Clutch Pack Solenoid Open
F1661 Alternator Voltage Low

Press select and hold for each code to clear. Then run machine to see what comes back.