Alan Caro
Active Member
Having problems starting a 600AJ Boomlift, anyone can help me what this code means?
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
600AJ malfunction code on crank
- Thread starter Alan Caro
- Start date
Nige
Senior Member
Depending on what brand of engine you have some of the list will not apply but it may give you some idea where to look. Because the engine will not start I would say that it could likely be some type of fault reported by the engine control.
Alan Caro
Active Member
Thanks! I verified, seemed like something was eating up all the voltage when I tried to start the engine, started checking everything and the starter was fine, computer was swapped and it stayed the same, checked the cable the sends the signal and it was fine as well, I decided to disconnect everything from the system and left the battery connected to the starter with the ground connected to the machine and tried to start it from the starter and it remained the same… checked the cables and the negative cable was not working so I ordered a new one, that hopefully will fix the problem