50'wedge trailer

[socalrobert]

customer uses the trailer to haul equipment and containers.the trailer sit for about 18 inches off the floor he wants to modify it so be easier to load I started by lowering the trailer 6 inches

 

[socalrobert]

 

[socalrobert]

the previous owner had the trailer lifted with 6" blocks I used the engine hoist to lift the axles into place

][/

]

 

[socalrobert]

the rear tire was pretty much on the frame I had to nock it out and added 9' 3/8” Rub Rail

 

[socalrobert]

here's a video on youtubeshe's a trailer was at the shop for almost a week and I was playing with it the battery was dying out

http://youtu.be/MlU_lhay7Uo

 

[Dualie]

is that a short bed reg cab cummins? I take it you built the truck?

 

[socalrobert]

is that a short bed reg cab cummins? I take it you built the truck?

yes I have 3 that I built

 

[socalrobert]

well the Trailer is back for more work

 

[socalrobert]

 

[Fastdirt]

Man that's some good work! Anybody who cuts and welds a trailer is a serious fabricator in my opinion. I understand the owner. A man wants what a man wants. Anything is possible.

 

[Dualie]

so whats the reason behind the flip tail? trying to get under the 65' overall for ca? IS the kingpin to rear axle under 41'?

 

[socalrobert]