1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

460 timberjack 2000 wont go into 2nd or 4th gear?

Discussion in 'Forestry Equipment' started by happylogger1957, Feb 5, 2019.

  1. happylogger1957

    happylogger1957 New Member

    Joined:
    Feb 5, 2019
    Messages:
    2
    Location:
    SD.
    Advice please timberjack wont go into 2nd or 4th gear
     
  2. partsandservice

    partsandservice Senior Member

    Joined:
    Feb 14, 2011
    Messages:
    546
    Location:
    Georgia
    With Key off, move shifter to reverse and then to down shift. While holding in rev down shift turn key to on position, it will run a diagnostic test on the transmission control. G for good, s for short and O for open circuit.
     
    Vetech63 and mg2361 like this.
  3. laycobeau

    laycobeau Well-Known Member

    Joined:
    Jul 8, 2013
    Messages:
    170
    Occupation:
    Lead electronic technician
    Location:
    Tulsa Ok. beau.bowlan@lei-corp.com
    sounds like your splitter solenoid is open Let me know what your test says.