Hopped in the machine and was goofing around moving some dirt and slipped the track. I went to go unscrew the grease fitting but unlike usually, not much grease came out. I figured maybe because it was cold it would need some coaxing. I tried a ratchet strap, chains and a hand winch, and prying against the front pulley with a big pry bar. Tensioner won’t budge. I backed the grease plug out most of the way and put the grease gun on it just to make sure it wasn’t clogged. Grease comes out. Pictures of my problem are attached.
What am I missing? Any help is much appreciated.
For easy copy paste if necessary, last 8 are BX901558
What am I missing? Any help is much appreciated.
For easy copy paste if necessary, last 8 are BX901558