davis1676
Well-Known Member
Hey Guys! I was searching online for information on a lift I bought and your site came up and it looks like you guys have gotten your hands dirty just a few times. I found this lift and it had been sitting up for about three years with a drive problem. I have rebuilt the zenith carb, replaced the alternator ( that was fun ) battery, flushed radiator and changed out the oil and filter. I got to the hydraulic tank and it had a bent area on top of the tank and the flange cover ( fill cap area ) was cracked open so rain could go right on in the hydraulic oil. I pulled flange and looked in the tank and to my amazement there was no rust but oil was as milky as it could get. Drained the oil and replaced with fresh oil and drained hydraulic lines best I could. Cranked that little jewel up and ran like a charm. I now am stumbling over the hydraulics with this thing and want to get the forward and reverse working and would like a little help anyone feel like helping me with a few questions. I need to pick someones ear.