Hello,
I own a 1988 pc-120. The hydraulics on this machine are manual.
The machine has sat for 4 or 5 years.
I put two new batteries in it today and it fired right up. Runs perfect.
Problem- the forward and reverse control levels are frozen- stuck. Also, the boom up lever is stuck. All the other controls work.
I tried to spray some pb blasted on the main control valves. I also tapped the arms with a hammer and a block of wood?
Should I try and take out the control values?? They are held in by a plate and two allen head bolts?
I’m a little lost at this point-
Any help would be great- thanks
I own a 1988 pc-120. The hydraulics on this machine are manual.
The machine has sat for 4 or 5 years.
I put two new batteries in it today and it fired right up. Runs perfect.
Problem- the forward and reverse control levels are frozen- stuck. Also, the boom up lever is stuck. All the other controls work.
I tried to spray some pb blasted on the main control valves. I also tapped the arms with a hammer and a block of wood?
Should I try and take out the control values?? They are held in by a plate and two allen head bolts?
I’m a little lost at this point-
Any help would be great- thanks
Attachments
Last edited: