• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

1986 3306 cat engine injection pump timing

B

Bighead

Member
Joined
Jun 23, 2020
Messages
21
Location
Engelhard NC
I have a old 3306 injection pump that I need to remove to have serviced. Any book on timing before removing the pump? Special tools needed?

Serial number of engine: 64Z03140

3306 DI
 
Coaldust

Coaldust

Senior Member
Joined
May 9, 2011
Messages
3,390
Location
North of the 60
Occupation
Cargo Tanks, ULSD, RUG, Methanol, LPG
Pin time the engine at #1TDC by using a 3/8” bolt into the flywheel housing. There is a pipe plug on the flywheel housing and a hole in the flywheel. Rotate the engine by hand in the normal direction. Pull the valve cover and wait for the intake valve on #1 to close. The pin should engage the flywheel. To verify TDC of the compression stroke.

Pin time the pump with a six victor forty one eighty six special pin.

Thats all there is to it. Easy Peazy.
 
You must log in or register to reply here.
Top