• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

shuttle shift

  1. S

    2006 case 580 SM S2,reverse problem

    Hello first time posting here,a lot of good info here with a lot of knowledgeable people.I have a 2006 Case 580 Sm with a shuttle shift trans.I recently got this machine and last weekend was the first time I have ran it for longer than 1 hr doing snow removal.I got the machine stuck and lost...
  2. outlawspeeder

    Shuttle linkage Case 580C

    A while back I rebuilt my shuttle transmission and I think I have the linkage wrong somehow. Now somehow it wouldn't go into reverse. I played with it and if I rotated the solenoid the rest of the way it would lock over center in reverse. I shorten one rod and lengthen the other. Looking...
  3. Swampman711

    Case 680k won’t go forward

    Hey guys I’m new to this forum I’ve been looking trying to find a thread about this and can’t seem to find one if you could point me in the right direction or maybe this will be the start of a new one for people to learn from thanks in advance! I’ll do my best to describe what I have going on...
  4. J

    Rebuilding Power Shuttle on Case 580se Backhoe

    i have recently purchased a Case 580se Backhoe that would barely move forward. Reverse was fine. After researching and doing pressure tests it became apparent that the Shuttle needed rebuilding. Pulled it apart and the Forward Disks looked pretty bad. I bought a complete rebuild kit, gaskets...
  5. P

    Case 580C shuttle shift loose

    Hello everyone, Brand new here and new to heavy equipment. I bought a Case 580C backhoe a few months ago. Already had to pull two cylinders to get repacked and fix the right brake (actuating lever broke) so I am becoming familiar with it. Next thing I want to try to tackle is the shuttle shift...
  6. R

    580 ck could shuttle pops out

    I have a 580ck 1968 backhoe with standard clutch and shuttle **** lever. In forward the shuttle lever pops into neutral. It works fine in reverse and works find in forward so long as I hold the shuttle lever so that it doesn’t pop into neutral. Does anyone have any ideas how I might troubleshoot...
  7. M

    Help: Electrical question on a Massey Ferguson 50e - Shuttleshift Solenoid

    I have a Massey Ferguson 50e tractor loader that will not engage in forward or reverse. I have replaced the Vickers solenoid block, and no luck. Fluids are up to correct levels, etc. The pedals cause the relays on the steering column to click, but no solenoid action. I tested current at the...
  8. S

    Case 580c shuttle driving me crazy

    Hi I have a case 580c that I am rebuilding the shuttle shift. The retaining rings for the forward pressure plate and clutch assembly does not fit in the groove.the ring gear ,piston and cylinder are new due to the previous owner not installing correct.i have made sure with the owner manual that...
Top