• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

safety switch

  1. H

    2013 Hyundai 60CR9

    The safety lockout level on the drivers left hand side, has failed. The machine is still 100% functional with the lever up or down. I had not noticed it before...its been sitting covered for about 4 months. No other issues, runs great. Anyone have this issue.
    • Hyundai60CR9
    • Thread
    • excavator hyundai hyundai excavator safety safety switch
    • Replies: 0
    • Forum: Excavators
  2. W

    Cat 303CR will not start with key, blade only hydraulics when running.

    New here looking for some help. I have a 303CR, serial DMA-05055, which will not start with the key. I can jump the solenoid and the machine will run. However, I do not have any hydraulics accept for the blade. I believe the issue is in the safety switch circuit. Machine will shut off with...
  3. B

    Takeuchi TL130 half dead

    So after 2 days of sitting, my TL130 has an issue. It started fine, but when I close the safety bar, nothing comes alive. No controls nothing. The gauges (fuel, temp, warning lights) are working, but also I noticed the horn was not working. I fiddled with the safety switch on the end of the lap...
  4. M

    ASV RC-100 Interlocks

    I picked up a 2004 RC-100 and did a bit of clean up to the console which was rusting. I just put it all back together and go to start it with no luck. Glow plugs come on to the left and low speed, engine oil light comes on when I go to start. I hear the fuel pump working but the starter won't...
  5. Bobcat Crazy

    Looking hard to find part for S185, wiring harness plug

    As I get closer to working out the issues with my (new to me s185) I had found that the wiring harness plug which goes to the Lapbar safety switch has been cut off. :mad: Does anyone know where I could find one? :( All help is appreciated! :cool: B-Crazy
Top