-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
power shift
-
K
Cat 735b rock truck , no power to move while loaded
I've got a cat truck , has the c15 , engine runs good , checked intake and exhaust system , bypassed fuel system , its got around 80 psi fuel pressure , no engine related codes , drives good not loaded but when stalling it with the brakes applied it'll only rev to 850 , lifts a full load no...- Kels306
- Thread
- 735b cat power shift rock truck
- Replies: 31
- Forum: Off Road Haul Trucks
-
D4D Bevel gear tooth contact
Hello everyone cat d4d 83j power shift I'm having issues with the contact of bevel gear and pinion gear in the rear end of my appears to be eccentric tooth contact in one spot I have converted bevel shaft and pinion gear to the updated nut type pinion replaced with new cat bevel gear and... -
Massey Ferguson 500B steering issue
I bought a low hour 500B powershift with a v8 510ci Perkins diesel. Gauges show I’ve got low track oil pressure. Manual states it should be 170-215psi but RH track is about 150 and LH fluctuates from 150 down to about 70psi. Power shift lube is also low. Should be 30psi but is running just over...- Mattman89
- Thread
- 500b massey ferguson power shift steering problem
- Replies: 4
- Forum: Track Loaders (NOT tracked skid loaders)
-
P
location of torque converter temp gauge on transmission D6c cat
Hi, does any one know the location of torque converter temp gauge on transmission D6c cat. where it is supposed to screw in somewhere? The current gauge is zip tied to the metal collar on the transmission line that goes to oil cooler. and is not working. D6c 10k8400