• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

electrical problems

  1. J

    John Deere 244j air condition not working

    I have a John Deere 244j and the air conditioning isn’t engaging. Compressor clutch isn’t turning on. Tested all the fuses to find them all good. Tested the relay to find that there are 5 pins on this relay. The top two larger pins, switched side, doesn’t ever have power, the other larger pin...
  2. Rolf Kraus

    Cat 315L Electrical Issue | Ser. #6YM01145

    Hello folks, I have an early Cat 315L that suddenly no longer started when I turned the ignition. Here are the details surrounding the situation, hopefully, there are some clues for you experts that may point me in the right direction. I was working on removing the hydraulic cylinder for my...
  3. ToxicTrav117

    1998 Cat 330 BL Monitor and throttle dial not working

    My dad told me that his monitor and throttle dial stopped working on the machine. Naturally, I went and checked all the fuses and everything is good. The backup throttle works so we can still use the machine but it would be nice to have the monitor and throttle working again. Can anyone point me...
  4. Y

    Mitsubishi ME20 Electrical Issue

    I have a Mitsubishi ME20 that was working fine until my neighbor put a battery charger on it with the ignition on. Does anyone know what part could have burned out or where I can find a manual? I also heard that Cat might have parts that could work.. Any truth to this?? I appreciate any help...
  5. M

    gehl 3935 skid steer loader brake issue

    hello can someone please help me with a brake problem that i have in my skid steer? it doesn't work the switch brake and lift bar it suppose to stop the machine when i lift it.thanks
  6. I

    JCB 260T electrical issues

    Hey Guys, I am in need of some help. For the last couple of days I have been troubleshooting a JCB 260T. The problem is definitely electrical. The issue begins with the HVAC system is not working, along with wiper motor. Starting in the fuse/relay box, I have checked and verified function of all...
  7. T

    Manitou Telehandler - Looking for ELECTRICIAN

    Hello, We have a Manitou rotating telehandler and it currently has electrical issues, producing warning alarms. We cannot solve this problem and are having trouble finding a good electrician. If I go through the Manitou website, it directs me to all their dealers, but most are not very...
  8. W

    John Deere 200 CLC starting/electrical problems

    Hoping someone has experienced this and has some ideas for me to pursue. Machine was running fine, loading dirt in pan, shut down, run dirt, come back start up reload etc. etc. etc. Then I jump in the cab turn the ignition switch and no display and only a click coming from the starter relay...
  9. T

    750c series 2 tracking issues

    i have a 2000 750c series 2 dozer with around 5k hours. Machine was operating fine, had been pushing some trees and rock, when I finished the job I had headed to the truck. That's when the right side of the dozer started jumping sideways. Ive since then changed the fluid, filters and right side...
  10. J

    Electrical problems on jd 310j

    Hi all! I'm Jeremy! Im a Taurus and I mess stuff up! Ok... now to be serious, I am in need of an electrical diagram of a jd 310j 2008. I'm trying to find an op and test manual but they say 10 days before I can get one.....too long to be down. Dealer says they print on demand....used copies are...
Top