• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

drive

  1. M

    JLG 450AJ DRIVING FORWARD/REVERSE TIMES OUT

    Got a 2000 model JLG 45’ man lift that wants to time out after 7 seconds when moving fwd or rev on level ground. I have to recycle foot switch every 7 seconds to get lift to stay driving. All other functions like raising basket works just fine when foot pedal is pressed and will not time out...
  2. JeffMiniSkid

    Vermeer S650TX, options for drive motor replacement

    Hi group, I am new to this forum so I apologize if this is in the wrong location etc. The hydraulic drive motor for the track is out on one side and the quote for replacement I'm getting from Vermeer just isn't doable (around $4500). I'm curious if anyone has done a similar job and what my...
  3. T

    DEERE drive motors. NEW.

    I aquired these at a DEERE plant surplus auction a few years ago. They are NEW. Info in photos. Can ship USA only. Located Iowa.
  4. E

    Case 1845c weak drive motor.

    I have a 95 1845c with originally weak drive motors on one side. The guy I bought it from had a machine that had bad drive motors and he swapped the motors fixing his and now the machine I have is weak. Sold it because it had been in a fire and needed alot hoses and stuff etc. So with that in...
    • Ewayne_R
    • Thread
    • 1845c case drive motor pump side spool tandem valve weak
    • Replies: 4
    • Forum: Skid Steers
  5. B

    JLG 60HA does not power forward/back

    I have a 1995 JLG 60HA. It has lots of leaks, issues, and otherwise but slowly I am rebuilding and repacking the cylinders. Right now, the biggest issues is DRIVE and moving forward and back. I have limited skills, but here is what I know so far... 1. The pump was replaced with a refurbished...
  6. J

    Bobcat S550 rolls when not moving

    Hello all. I have a new to me 2014 Bobcat S550 skid steer. Hand/foot controls, 2000 ish hours and in good overall condition. Problem is when parked on a slope it creeps down hill, forward or reverse doesnt matter. Set the park brake, it stops right there. Is this normal? Our T300 doesnt move on...
  7. G

    1845c loses drive after shutting off

    1993 1845c Everything functions great upon startup. I can work the machine as normal, as soon as I stop the machine/lift the safety bar up and try restart the machine I lose all power to the drive wheels. Behaves like it's in neutral, no load on the engine. Have full control of boom and tilt...
  8. P

    Cat 268B drive/steer problem

    I'm working on a 2009 cat 268b with poor drive and steer function. When the machine is started it pulls in reverse against the parking brake. When the brake is released it want to roll all over the place like the joystick is not in neutral. The machine rolls and steers but has a huge delay...
    • pat86
    • Thread
    • 268b cat drive hydraulic skid steer sterr
    • Replies: 7
    • Forum: Skid Steers
  9. Bradly Chisholm

    Case 1845 Sprocket Cluster

    Hello all, I have a Case 1845 and I was wondering if someone out there had some info to share with me regarding drive chain adjustment on the Sprocket Cluster? I know the wheel adjustments, just not the one in the middle. Thanks in advance, Brad
  10. B

    JLG 60H - Drive wheels STOP when turn switch is used

    Hope this is ok, Im cross posting this here as other manlift issues have been discussed in this area instead of Forklifts and Telehandlers. I guess I posted in the wrong Topic earlier. Apologies. -------------------------- Hello all, I have no experience with this type of equipment. Im all...
  11. B

    JLG 60H - Drive wheels STOP when turn switch is used

    Hello all, I have no experience with this type of equipment. Im all automotive and aviation. We have a JLG 60H man lift that sat for a while. When moving the Lift and attempting to use the turn switch, it abruptly stops the 2WD wheels, resulting in a rather jarring experience. There may be an...
Top