• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. Kyle Helmke

    Kobelco SK290LC. All functions in super slow motion

    make sure someone didn't hit the heavy lift or independent travel switch
  2. Kyle Helmke

    Kobelco sk75sr-3 jerky hydrolics ?

    change your mode to s or e might want to check pilot pressure if it's set too high can cause this issue
  3. Kyle Helmke

    Hydraulics delayed

    If this machine has a pattern change make sure it's locked in place and not part way shifted on the bottom of the joysticks there are screens in the fittings might want to check for plugging. if you have independent travel try running the same tests over again with independent on and see what it...
  4. Kyle Helmke

    Kobelco Sk115 Vandalism

    looks like a dynamic acerra machine if so the harnesses are not that expensive I've changed several due to the insulation coming off
  5. Kyle Helmke

    Kobelco 35srlc

    what was your power shift number on screen 24
  6. Kyle Helmke

    Kobelco sk200-8 flash file

    you need a handy checker cable and software
  7. Kyle Helmke

    SR250 ATS FAIL

    no problem glad I could help
  8. Kyle Helmke

    Case 580K Harness Connectors

    that's not true at all. the connector part numbers are in the schematics under the connector identification from there they need to put the connector part number into eparts and it brings up the terminal numbers. post your serial number and the connector number your looking for
  9. Kyle Helmke

    Skid steer Case 1840 tandem Pump hidraulic problem

    they cannot be gear pumps they are variable displacement pumps for the travel motors the aux pump i think is gear
  10. Kyle Helmke

    SR250 ATS FAIL

    what program are you using, you need easy engine tool to access ecm data the machine will not always display the causing fault code through EST.
  11. Kyle Helmke

    Kobelco 35srlc

    1. First thing would be to add pictures of the serial number and monitor. this will help identify the generation of your machine. 2. Does your machine show any errors? 3. are you able to read your monitor if it works, if so we can check pressures through the screen 4. check your track cycle...
  12. Kyle Helmke

    850k dozer runs but wont move

    there should be a pressure switch in the parking brake circuit that tells the machine it's off. you could bypass it to see if your trans ties to move.
  13. Kyle Helmke

    Tracking and auto idle fault

    the first place to start would be track cycle times. lift each track off the ground and time 3 rotations of each track. then compare this will help you isolate an issue to one pump or another. check them in both high and low speed travel
  14. Kyle Helmke

    Kobelco SK 150lc mark 3

    there are pressure switches that turn auto idle on and off one will work off your joysticks and the other the travel levers. if neither is working check your fuses first. can you still read your monitor if so you can check for errors
  15. Kyle Helmke

    MDI YUTANI 240BLC OR KOBELCO K909LC HELP My Boom broke in half

    can you post specs for your boom
  16. Kyle Helmke

    Tracking and auto idle fault

    sounds like your right travel lever is worn out. The poppet is probably getting stuck activating the pressure switch not allowing it to go into idle. when you are straight tracking if your travel lever is not sending pressure to the spools correctly the straight travel spool will try to balance...
  17. Kyle Helmke

    Kobelco sk125-2 vibration

    is the engine running poorly like it's missing or is it the hydraulic pumps that are vibrating
  18. Kyle Helmke

    Kobelco SK 150lc mark 3

    does it idle down and then not rev back up or does it just not idle down
  19. Kyle Helmke

    Kobelco sk160lc-6e hydraulic issues

    do you have independent travel or heavy lift on? when the pump loads up you need to look at the back screens and see what is turning the pump on check the wires where they go through the metal clips under the pump or right at the plugs
  20. Kyle Helmke

    Kobelco sk160lc-6e hydraulic issues

    it sounds like it may be an issue with the pilot pressure sensors. 1. if you operate boom swing or bucket without a travel pedal what happens. 2. when you put the machine in independent travel what does it do. 3. what do the nega-con sensors read in the back screens 4. what do your pump psv's...
Top