• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. C

    JD 310c Starting intermittently...

    Does the starter solinoid need to be removed so that you can get at the starter bolts,I can only see the one on the bottom.
  2. C

    Bantam C-350 Crane

    when i bought my c350 ,i had to change a big old roller bearing ,must have been at least six inches diameter. it was attached to a sprocket that drove the chain to move a track.crane was used in a gravel pit,and dug a lot used in building interstate I 94 in southwest michigan to the indiana...
  3. C

    Bantam C450A

    craneguy i still have my manual for the bantam c 350.
  4. C

    Bantam Crane??

    i believe one side is for your main and secondary hoist drum, and the other side controls power boom down,instead of slipping the boom brake to lower the boom.my old bantam did not have the power down feature,wish that it did.should never got rid of it,the guy i sold it to is still using it. you...
  5. C

    can anybody tell me the correct way to remove the fuel injectors in a 310 c john deer

    i was able to rotate the harmonic balancer by pulling the water pump fan blades. thanks again. jake
  6. C

    can anybody tell me the correct way to remove the fuel injectors in a 310 c john deer

    thanks willie 59.if i take the engine side covers off,do ya think i can reach it from there. or crawl under the machine and try it from there. willie 59 please dont ever leave this forum.ive learned alot reading what you tell others,you know your stuff! thanks again, jake.
  7. C

    can anybody tell me the correct way to remove the fuel injectors in a 310 c john deer

    tractor has been sitting, and i want to make sure that no water got in through the exhaust. want to remove injectors,crank engine over a few times, too blow any water out of the cylinders. drain engine oil and replace it with a new filter.get the thing started turn it around using the hoe to...
  8. C

    Hydraulic Pump for 580K Case

    if it aint broke,fix it till it is. lol
  9. C

    Case 580C (Extendahoe) restoration

    try removing a linkage,then plug weld the wobbled out hole.drill a hole for your new pin.cheap fix and as good as new.
  10. C

    what makes a detroit run away?

    detroits will run away .as i said ,i almost stalled my dragline,it started running in reverse wide open.the cable drums turning backwards also,causing a rats nest in the cable.i dont know how to explain it any other way.
  11. C

    Next Prospect JD 310

    /quote]
  12. C

    what makes a detroit run away?

    i have a 353 detroit in my bantam dragline. while digging in some blue clay,digging a pond,i almost stalled the engine, darn thing started running wide open in reverse.had to jump out.run to the back an flip the lever shutting off air to the blower.when i restarted it, it smoked for about...
  13. C

    JD 310c Cold oil

    how cold is -35 celcius when converted to farenheight. thanks jake
  14. C

    Vertical Upwelds

    visited that welding web site,learned something new,things have changed since 1971,the triangle method does seem to make sense though, i never failed a welding test using the way i was tought. again good luck union ironworker 951756
  15. C

    Vertical Upwelds

    another way to describe the weave is to say pretend your drawing a figure eight horizontoly, slowly working your way up. using a dc machine and 7018 3/32 welding rod will help a new guy get the hang of it. good luck. union ironworker 951756
  16. C

    Next Prospect JD 310

    w8kt my 310 weighs 12000 lbs with extendahoe and 4in1 bucket and mfd chuck jacobs
  17. C

    Why do I need a 4/1 bucket?

    they do a good job carrying stumps after you dig them out .cant imagine having a hoe without one
  18. C

    How many hours on a screemin' jimmy

    I have a 353 in a bantam dragline crawler crane, 1957 original engine. it still runs fine even when i almost stalled it out digging in blue clay. the engine ran backward full throttle before i could shut it down. when i restarted it smoked alot for about fifteen minuets then everything was...
  19. C

    Welding a air compressor tank and sand blasting question?

    SPEEDPUP i use a miller aead 200le 200 amp welder, it has a 30 amp recepticle on the front. that should be plenty to run an air compresser
  20. C

    Welding a air compressor tank and sand blasting question?

    speedpup you are right ,its probably a vibration crack. not rusted out .take it to a certified welder its an easy fix .I am certified and have welded a few your bigger problem will be purchasing an inverter to go from three phase to single.I have plumbed a ball valve to the bottom of my tank so...
Top