• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. H

    Komatsu d65e-6 float tank for fuel

    Thank you, we ordered a normally closed 24v valve and plumbed the breather back to the tank. The float tank is hard to access. Will vent the fuel tank
  2. H

    Komatsu d65e-6 float tank for fuel

    Sorry I should have done a bit more searching Looks like I need to Investigate the float in the float tank https://www.heavyequipmentforums.com/threads/komatsu-d65e6-problem-with-the-fuel-spilling-out-of-the-float-tank-breather.33466/
  3. H

    Komatsu d65e-6 float tank for fuel

    I cranked over the engine without the breather installed and it sprayed fuel out, under a good amount of pressure. Is this normal? I am wondering if it would be OK to route the breather hose back to the fuel tank, and put a vent on the fuel tank. Does anybody have a suggestion on what I can...
  4. H

    Komatsu d65e-6 float tank for fuel

    I stand corrected, it appears to have a breather coming out of it. It steams when the engine is running, and occasionally leaks and I just witnessed it.
  5. H

    Komatsu d65e-6 float tank for fuel

    Hi, what is the purpose of the float tank? It is leaking on my dozer and looks very hard to remove Is it possible to bypass this tank and supply fuel directly from the fuel tank? Return fuel to filter housing or tank?
  6. H

    Komatsu d65e-6 steering case fill port

    Thanks the plate seems easy. How do we know when it's full? Is there a weep hole we can open up? Thanks alot for the response
  7. H

    Komatsu d65e-6 steering case fill port

    Dozer had a leaky steering pump hose. Where do we add fluid back at ? The service manual picture is so blurry we can't figure it out Thanks in advance =]
  8. H

    Kubota svl 95 not driving straight

    Does anyone know of a calibration or procedure I can do to get my machine to track straight? Like joystick calibration or drive motor auto adjustment My deere had thus on the service page screen Thanks in advance
  9. H

    2011 john deere 200D LC one way aux hydraulics not working

    thank you Dave :) hopefully my next post will be a video of this pro link thumb actuating!
  10. H

    2011 john deere 200D LC one way aux hydraulics not working

    thank you for the help everybody, im at the tail end of the two way valve install, while leaving the one way valve installed. the only issue i am running into is the shuttle valve. the drawings from john deere show the inputs being across from one another and the output being one of the other 4...
  11. H

    2011 john deere 200D LC one way aux hydraulics not working

    it is hard to follow it terminates at a selector valve or something
  12. H

    2011 john deere 200D LC one way aux hydraulics not working

    Unfortunately nothing is legible. I think I will come up with my own setup and mount it right at the pads on the boom and tap on where the orfs plugs are. I am trying to avoid plumbing two additional hoses to this. I haven't pressurized the lines on the boom yet to make sure they're closed on...
  13. H

    2011 john deere 200D LC one way aux hydraulics not working

    Thanks. I found the wire loom for the joystick buttons. One last question. Is there a kit they sell to retrofit 2 way hyd or must I piece this together ?
  14. H

    2011 john deere 200D LC one way aux hydraulics not working

    This is what is there Thank you everybody
  15. H

    2011 john deere 200D LC one way aux hydraulics not working

    yes, this is there. when you push the hammer foot pedal that solenoid on the top of that block engages.
  16. H

    2011 john deere 200D LC one way aux hydraulics not working

    i purchased the service manual for the machine today and it has been very helpful. so the two buttons on the right joystick goto their respective relays behind the seat. K30 & K31. these relays pass power through to two small looms underneath the air cleaner. once the sun comes out tomorrow...
  17. H

    2011 john deere 200D LC one way aux hydraulics not working

    Thanks, we read the book last night but none of the tool selections allow you to change the flow direction category. The book only briefly discusses hammer 1 and 2 and adjusting flow rates. That's it.
  18. H

    2011 john deere 200D LC one way aux hydraulics not working

    i am glad to see i'm not the only one with a 200d. i just bought a 2011 excavator and the machine is setup for a hammer. the continuous flow works fine but i want to know how to use directional flow to control a thumb? the right joy stick has buttons for it. and when you press them i HEAR a...
  19. H

    deere 200d service manual

    THANK YOU VERY MUCH!
  20. H

    deere 200d service manual

    hello we just purchased a 2011 deere 200d lc. it has almost 6000 hours. we are going to service the machine and wanted to check the overhead on it. does anybody have the service manual for the machine so i can see the tolerances, etc. thank you
Top