• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. BigWrench55

    How high can it go

    Let the chips fall where they may. :rolleyes:
  2. BigWrench55

    How high can it go

    That is not what I am saying. I am merely pointing out when I filled up my tank last. That is how I chose to give a reference of the time frame. If you don't like how I phrase it. Then read on like everyone else has. If you are still butt hurt. Then report the problem and have me banned.
  3. BigWrench55

    How high can it go

    Not political it is truth. If you don't like my terminology then report me and have me banned. I really don't care.
  4. BigWrench55

    This will be an interesting thread moving forward......

    Maybe you guys should start another thread and argue about economics and the welfare state. I am with Vetech63 on this one. Don't get this thread locked up on some **** neither side can prove or do anything about.
  5. BigWrench55

    This will be an interesting thread moving forward......

    My step children are all grown and out of the house except one. Three boys and a girl. Then I had to go and give her a f@#k trophy of my own. Probably the best thing I ever did, but if it weren't for this beautiful little girl. I would've told the old lady and the last one to leave the house to...
  6. BigWrench55

    This will be an interesting thread moving forward......

    Being a stepfather is the hardest thing that I have ever done and I don't say that flippantly. If I knew then what I know now. I wouldn't have done it. I don't recommend it for anyone. Being a stepfather isn't for the weak.
  7. BigWrench55

    Staying awake and focused

    On long hauls or just plain tired and worn out from the heat. If I get sleepy or go in to auto pilot. I make the first stop that I can. Usually a fuel station. And I walk around drink a soda, smoke a cigarette, or eat a snack. If I am in the middle of nowhere. I will either pull over and walk...
  8. BigWrench55

    John deere 450D lc low fuel rail pressure

    With hpcr fuel systems you will need to isolate all of the return fuel lines and measure how much fuel is being returned from the injectors and the common rail. Also if you have poor flow to the high pressure pump, or if air is being introduced to the system. That can also give you a low rail...
  9. BigWrench55

    Volvo EC160DL regen issues

    I will need more information about what you say the egr is doing to be anymore help. The valve is the only thing that I see that is electronically controlled. I see no other sensors with the egr. I am failing to understand what you are seeing through the display.
  10. BigWrench55

    Volvo EC160DL regen issues

    This is where MA2508 is located. This block is mounted near the valve cover on the flywheel end of the engine left side. Item 4
  11. BigWrench55

    Volvo EC160DL regen issues

    This is how you can test if the fuel dosing injector is good or not.
  12. BigWrench55

    Volvo EC160DL regen issues

    This code is why it will not complete a regen. Psid89-5
  13. BigWrench55

    Volvo EC160DL regen issues

    Yes. Also if it isn't completing regeneration then you have a heating problem. Your burner could have failed. You could have a faulty temp sensor. Or the acu could've failed. All of which will need tech tool ( software) to determine what is the problem.
  14. BigWrench55

    How high can it go

    I really don't pay attention to the price of fuel. Before got out of the service truck I didn't drive my pickup much. And the last fill up was before Brandon was in office. It was in April of this year when I got out of the service truck and started driving my pickup. It still had a full tank...
  15. BigWrench55

    How high can it go

    3.66 here in Texas. Still two bucks higher than when the mean tweeter was in charge. I picked a hell of a time to get out of the service truck and started using my own fuel. I don't even drive my pickup anymore. That would run me 400 a month. :mad:
  16. BigWrench55

    Hydraulic level check and boom removal safety

    Bucket should be curled in. I don't know what you have at your disposal to help you with the boom cylinders. I only do one at a time. I position the machine so that I can lower one cylinder onto the track. I use a block to keep it level and I remove the rod. And I leave the barrel on the machine.
  17. BigWrench55

    This will be an interesting thread moving forward......

    Sorry Truck Shop I don't know the meaning of SDA. I never been able to discern short hand text. I often have to Google some of you guys short hand. But this one eludes me on the Google.:oops:
  18. BigWrench55

    This will be an interesting thread moving forward......

    I was finishing up one Friday when I was in construction. The superintendent came over to see my progress. As I loaded up the last of my tools I told him to have a good weekend and I will see you Monday. He said no I will see you tomorrow. I told him that I don't work on the weekends. He gave me...
  19. BigWrench55

    Case 1835 smoking please helppp

    I don't know what the specs are for your engine. I am just don't know enough about your engine to say with confidence that is it. If it were me I would check the other cylinders and run number 1 the same. As far as I know those aren't giving you any problems, so go with what is working.
  20. BigWrench55

    Case 1835 smoking please helppp

    Each cylinder has its own tdc. If the cylinder is is all the way up and both valves are closed. Then that cylinder is at tdc and that is the one you want to adjust.
Top