• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. Galion118c-ryan

    Galion 104 series b questions

    for my 118 assuming its similar i just remove the two little bolts on the filter housing on the top of the hydraulic tank and keep it over where the return is probs about 4 inch or so down from the top, for injection pump might be able to find out who made them and source from that point so...
  2. Galion118c-ryan

    Galion 118c

    So today finally had some time and got a hub off i heated it right up till the antiseize started to smoke and then gave it few hits from behind with a sledge then let it down a did a few figure eights in the yard then had a look and it had moved about 5mm or 1/4" then lifted it up and it come...
  3. Galion118c-ryan

    Galion 118c

    Yeah thanks been through all those and welded an old 2.5 inch trailer king pin on a nut with no joy bashing with sledge hammer , gonna try with more heat this time with a porter power and puller and sledge hopefully next weekend, once i get one off i can sort it and have a plan for the others
  4. Galion118c-ryan

    Galion 118c

    Yeah ill trace the wires and see where they go however im still thinking that valve on top of transmission has something to do with it ill check it out, could even be just the oil level low where's the plug for that and grade of oil to put in, on another note where is the grab point of the...
  5. Galion118c-ryan

    Galion 118c

    Yeah ive got all the hub nuts off only thing is they are cast by the looks so wasnt really planning on alot of heat and a sledge hammer. If u take a look at the second photo that valve has a breather, clutch temp, pressure line up to gauge and the steel line into the top of the transmission...
  6. Galion118c-ryan

    Galion 118c

    Yeah i made up a puller with a 50t atleast cylinder and it stripped the 6 holes while beating it with a sledge hammer and i noticed there is two flat parts with hole in the hub when u take the tyre off so i might have to make a puller up to suit that, the clutch ill investigate that im...
  7. Galion118c-ryan

    Galion 118c

    Hey everyone this is my galion 118c with 4-71 detroit power plant here in australia i purchased it for $500 from the ag school i went to bit of story anyway, im in the process now of getting her back up to operating scratch things ive done so far are resealed the two lift cylinders two rear...
Top