• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. D

    Bobcat 751 lift arms shudder when being touchy

    Thanks for the replies. I'll look it over real well this weekend. I was thinking more along the lines of something being off in the hydraulic block. I know theres a ton of little passages and release valving I was thinking something was sticking inside the block. Searching Google and the...
  2. D

    Bobcat 751 lift arms shudder when being touchy

    I have a 751 that had leaking spool seal in 2016. Before snow season I replaced both spool seals and also took care of a drip on the emergency lift arm release by changing that whole block out. Plowed with it last 2 winters with no issues just fluid swaps etc like usual. I rarely use the...
  3. D

    CASE 1845c Restoration. Follow my progress!

    My best friend owns a body shop too and I restored my 751F like u are. I started sanding but eventually blasted it all. I have 110 hours in mine w repairs and paint but was worth it. I used PPG epoxy primer over PPG fleet 2 part for finish. Like a brand new machine the decals are icing on...
  4. D

    Lifted a log straight up

    File it as a bad check claim. Doesn't matter what happened after the fact. Ur a business and he bought something writing a bad check. It's a criminal charge not civil matter. In NJ you could also file theft of service go to your local police and see if they will press it
  5. D

    Repairing creeping Bobcat

    Is there a trick for seating the bushings in the steering bars. I got the old ones out but was only able to get one fully seated using a c clamp. I have a 751F and don't have shocks behind the seat panel. I'm going to try washers on bolts and use an impact but wondering what you use Old...
  6. D

    bobcat steering bushing help

    had alot of slop in my steering bushings and while working on the machine I figured id swap them I had ordered the kit for the steering and pedal bushing. no problem getting old out, the rubber and the metal surround were seperated a few taps and I got the metal 'sleeve" out. Now how do I get...
  7. D

    Anybody have an F series bobcat with factory roof glass

    thanks for the help, my gasket isnt like the one pictured in the video above Ive spent hours searching the net and youtube nobody shows a top glass install. Its the right one came for the machine factory glass. On the F series they dont use the bolts w knobs I checked the online catalog...
  8. D

    Anybody have an F series bobcat with factory roof glass

    Hey guys Im almost done restoring my 751 and Im about to install the roof glass. the sealing gasket is different than the door and rear glass it has no locking cord seal it just has the tucking lip. Theres only a few inches between the glass and the mesh roof I am just wondering if the tucking...
  9. D

    Bobcat detent springs/float mode

    Almost a year ago I did the lift and tilt spool seals in my 751F and a big thank u to the write up on here for the info and help on here. I somehow managed to pop the detent cap off when I pulled the spool out and lost the spring in the shop. I use the machinE for snow and it was leaking bad...
  10. D

    help with bobcat arm switch

    I have a 1999 751 that I have apart for new paint/decals. I removed all the electronics and unrouted the cables so they are in the machine and seperated the cab. This is a weekend project I have a body shop to work in but cant leave the machine disabled hence the reason for the re-routing. I...
Top