• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. steve waldner

    idigbest Vbucket

  2. steve waldner

    Pc360lc-10 final drive slop

    I have this 2012 360-10 10k hrs New sprocket and rails (oem) but the tracks walk back and forth 2 “ when working , it drives me nuts . Had the planetaries apart and completed the insides to new parts , hardly a difference if any . Is it possible the motor brake is not grabbing right and it...
  3. steve waldner

    Pc360-10 swing circle

    Had some slop in swing circle bearing , replaced it with a after market from con equip. Took out all the bolts from upper , took all hoses from swivel , plugged hoses , used boom to lift machine high enough for undercarriage to clear, took sun gear from planetary , pulled lower out from...
  4. steve waldner

    Komatsu display braket

    Hi guys , I’m mounting a grade control display in a pc360lc-10 2012 model , and it can with ram mounts witch I don’t like , can someone post a picture of how they have done it . Thank you
  5. steve waldner

    Pc360-10 rebuild

    New pins ,bushings,paint , undercarriage...
  6. steve waldner

    Best pin grease

    Hi , what u guys useing to grease your excavator -dozer pins/bushings . I used to use just whatever I found , and my pins did not last , now I use a Schaefer 238 . It’s seams to work way better . I also use 274 for smaller pins etc , and the new green 219 for bearings . The 238 meets cat pin...
  7. steve waldner

    850j deere

    Got me a used 2008 850JWlt with 7200 hrs . Took to shop right away and did pins , cause no zero took grease , decided to do tracks . And cleaned cab and new joystick skins , got a great deal . Sold old 850blt
  8. steve waldner

    850J 2008

    Got myself a 850J 2008 with 7200 hrs ,
  9. steve waldner

    Volvo bm a30c engine

    A30c dump truck engine ran out of water, kid didn’t watch gauge , , anyhow the #2 piston roasted and cracked the cyl sleeve , was gonna just fix that piston and sleeve , but skeptical , reason for this post is the oil pan , how to remove with those 2 hydraulic pumps in the way, do I have to...
  10. steve waldner

    Pc360lc-10 machine history

    I have a pc360lc-10 , would like the history on it , serial # A32230 , anybody here the can do that? Thank you
  11. steve waldner

    Transformer loader bucket

    Found this ol bucket for 800$ put edge on it , and welded ears on it for komatsu 90mm . Got it specifically for that pond job 2 years ago , finally dried enough were I went and scooped all th red muck out, took some doing , as I had to move some of it over 200 feet , had 5ft muck in the center...
  12. steve waldner

    Tms700b Cummins CAPS pump problem

    I have a tms700b with isc Cummins with the CAPS fuel sys , it started missing real bad and has black smoke when Accelerated but has a lot more power , replaced injectors but didn’t help . Almost looks like out of time a little , anyone experienced with that on here? Can’t hardly get parts from...
  13. steve waldner

    Aftermarket rail vs oem

    Pc360-10 gotta replace track rail , what’s the big difference between itr aftermarket vs oem ? Gonna keep machine for awhile yet .can get the aftermarket for under 5k$ for both . Thanks
  14. steve waldner

    Remote camera

    So I bought the wireless cab cam , mounted the screen inside the cab , when I go lift I slap the camera on the boom and slide in a dewalt battery , can also mount on extension , man is it awesome , I’ll post a better picture , but u can always watch ball position , and see the load position when...
  15. steve waldner

    Pc360 pins

    Ok pc360 excavator , got some wore out pins and bushings , already replaced some last year with aftermarket , they already seam wore out quite a bit , using good grease , is the factory bushings better or what do u guys think . Need to do a bunch , and in the past I have done whole machines with...
  16. steve waldner

    850B deere dozer problem

    Hi my 850b dozer , the bolts got loose that hold the drive housing , bunch a snapped off , but the worse part is the transmission pull away from the housing , stripping some bolts, what do I have to do to get the transmission out , I could pull every thing out but the hydro/tranny don't fit thru...
  17. steve waldner

    pc78mr-6 track tensioner

    I have a pc78mr-6 and one of the track tension seals keeps blowing out, I got rubber tracks on this model, tried everything , happened 6 times already , I install new seals everytime , what could be my problem ? any help would be very nice ,thank you steve
  18. steve waldner

    Tms700b engine

    model year 2000 grove crane tms750b all of a sudden I got so much power that nothing could stop it, but when Idle it misses real bad , and when you step on the accelerator it has nasty black smoke , but lots of power . Missis a little when high idle . What am I looking at ? What am I up against...
  19. steve waldner

    Grove boom transducer zero

    grove tms 700b , I got the hoses off the transducers (weight indicators) and when I go into pat monitor and set them to zero . It shows -7 thousand . When I pick the boom up it says I have 4000 . Can someone explain or give me some advise with this ? The reason I zeroed them they seamed to give...
  20. steve waldner

    Mounting boom camera

    hi got the tms700b and was gonna mount a camera (cab cam) on the boom tip with a swivel bracket, so it’s always looking down . The camera is wireless but needs power to function . Was gonna use the boom length cable to power it . It has 12v dc but not enough power to run the camera . Any ideas...
Top