• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. E

    Cleaning up and painting a Link Belt 86100

    I believe you this is a 2012 and the prep work was brutal....it had rust in places i didn't know even exists....almost done i need to do some light rust repair in the door on the upper cab paint the weights and out riggers and she is done. Next job is the National boom truck....
  2. E

    Cleaning up and painting a Link Belt 86100

    Thanks she was a rust bucket countless hours of prep. This week i will be painting the counter weights and outriggers
  3. E

    LINK BELT 86100 outrigger lube

    What if any is the recommended lube for the outriggers on a 2012 86100 i have one thats binding when all the way out? Is that wear strip removable without pulling the outrigger?
  4. E

    Cleaning up and painting a Link Belt 86100

    Here are some pictures of the job
  5. E

    Leaking steering box

    I need some advice. I'm working on a link belt 86100 and the front steering box is leaking out of the front cover. It was also leaking from the line which i replaced already that was 80% of the leak. In the pictures it is leaking between the first casting and the body of the box. There is a o...
  6. E

    Case 580se

    It's too bad the PO replaced the cooler lines and didnot paint them...the 580 was used to load sanders with salt than was sold the new owner left it sit for 2 years and never washed and oiled it and the cooler ,radiatator and cooling tubes are rotted away....along with the brake lines ...the...
  7. E

    Case 580se

    The oil coolers in the link are about 1/4 of the size of the factory cooler...the large one might do the trany but i dont think it would come close to the hydro ..and the last thing you want to do is overheat your hydraulics or your shuttle shift on a 90 degree day.....i have looked on the net...
  8. E

    Case 580se

    I Belive i have the newer setup ...it appears i have the small hose that feeds the master that goes to the fitting on the hydro filter...the lines that are leaking are the back meatal lines on both sides...i will also replace the rubber hoses at the wheel cylinders...the upper lines that go to...
  9. E

    Case 580se

    Yours looks good compair to mine (no fins)...Thanks for your advice...maby someone will chime in with Knoledge off a good graveyard....
  10. E

    Case 580se

    Thanks for the reply..the fins in the oil cooler are gone the cooler is not leaking but the cooler tubes are..i planed on changing the belt the altonater and tensioner were already replaced by the PO..good susjestion on the coupler...do you know of any good places to find a used cooler..????
  11. E

    Case 580se

    I am working on a 1984 580SE...it needs a radiatator and an oil cooler 2 of the oil cooler tubes that run the frame are leaking...and the cooler fins are rotted out...and both rear brake lines are leaking....on the cooler lines can i use hydraulic hoses?.i would change all 4 of them...how much...
  12. E

    JCB 411 Trany ?

    I replaced one relay panel...and repaired the other and the fuse panel..I fixed the problem yesterday...I called JCB support...the 3 wire plug under the dash is for a buzzer that had been removed prior to me...and the 2 wire plug is for a cold weather start hydro dump...it ended up beeing the...
  13. E

    JCB 411 Trany ?

    Yes the trany worked before the fire .I was very caurfull in splicing in the repair wires doing only one at a time and verifing the numbers on the wires.it looked like the starter relay stuck and all the power and ground wires from the starter to the fuse and relay panel melted i was able to...
  14. E

    JCB 411 loader trany help

    JCB 411 Trany ? I am working on a JCB 411 loader...It had a wiring fire I repaired the harness everything works except the trany.:Banghead.and the spedo.:Banghead.trany workes in 1st and 2nd..and R...no 3&4...there was no problems with the harness to the trany..any help would be appreaceaded
  15. E

    JCB 411 Trany ?

    anyone
  16. E

    JCB 411 Trany ?

    I am working on a JCB 411 loader...It had a wiring fire I repaired the harness everything works except the trany..and the spedo..trany workes in 1st and 2nd..and R...no 3&4.:Banghead..there was no problems with the harness to the trany..any help would be appreaceaded
  17. E

    HELP...JCB 416 loader

    Thank you any way......
  18. E

    HELP...JCB 416 loader

    I got it....it is a manual for a backhoe........I need a manual for a 411,416 wheel loader....did you send the wrong one......
  19. E

    HELP...JCB 416 loader

    try to mail it i will let you know if smoke comes out of my computer......earnies2@aol.com....thanks
  20. E

    HELP...JCB 416 loader

    I am in the prosses of repairing a 416 loader that had a wiring fire...I need to either get a wiring diagram or comit suicide...lol...I fave repaired the rear harness and reinstalled it..all but one plug that should go on the side of the trany the wires are #111 and #600X it is a 2 wire plug...i...
Top