• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. C

    Mustang / Gehl Intermittent Start Once Warm

    Any thoughts about this being the starter relay acting up?
  2. C

    Mustang / Gehl Intermittent Start Once Warm

    Thanks, for that input pumpguy. I'm doubtful it is the key switch but it could be for sure. I say this as if I rapidly turn the switch is will start but only after I rinse & repeat the quick turning 6-10 times in a row. That works 90% of the time. But 10% of the time, it simply will not...
  3. C

    Mustang / Gehl Intermittent Start Once Warm

    I have a low hour Mustang 2105 with the 110HP Yanmar engine. Same as the Gehl 7800. Has only 1200 hours. It is a great machine but since I've purchased it used, it has very annoying intermittent starting issues. I'm not sure if it is electronic or not. Basically the machine always...
  4. C

    Gehl 7800 / 7810 Controls - Fine Bucket Movements Difficult

    Hi Ronsii, does NOT matter if full throttle or low idle. Just a difficult. In fact, I'm usually trying it at low idle. I don't think the issue is how fast it moves. The problem is that I can't "feather" the controls to make very small, fine movements with the bucket. Basically once I...
  5. C

    Gehl 7800 / 7810 Controls - Fine Bucket Movements Difficult

    Hi, I am a proud owner of a Gehl 7800 (it is actually a Mustang 2105) and was hoping to get some insights from those familiar with the machine. I believe the 7810 and some of the smaller units likely were offered with the same H-pattern "Dual Hand Controls" (not positive). Overall a very...
  6. C

    Terex 760B w Perkins starting issue & turbo oil leak

    And just to let you know, once it fires up, it does not smoke and runs great.
  7. C

    Terex 760B w Perkins starting issue & turbo oil leak

    Hi Folks, Looking for some pointers on my Terex 760B with a Perkins 1004C. We are in TX and normally do not have to deal with colder temps but regardless the starting issue is still prevalent in warmer conditions (just much worse in the 30s and 40s). So I always have to crank this thing...
  8. C

    Stabilizer Lock-Out Valve Shooting Fluid - See Pic

    Have a Terex 760B and my stabilizer valve is shooting out fluid. I believe it is actually a stabilizer lock-out valve. There is a small 1/8" hole which may serve as an emergery overpressure maybe? Appears it is missing an insert consider my opposite valve does not have an open hole...
  9. C

    Terex Loaders - Hydraulic Fitting threads? BSPP?

    Here you go. I hope this is helpful. Not knowledge enough to be able to tell the difference visually. I took pic of two different fitting, just in case. 1/2" hose.
  10. C

    Terex Loaders - Hydraulic Fitting threads? BSPP?

    Hoping someone could confirm what fitting types that Terex uses on their backhoes? I've got a 2006 760B that needs several hose replacements. I've been able to identify Gates hoses on a few of the connections but the thread types have been a bit difficult for me to identify. I'm assuming...
  11. C

    Newbie owner - Terex 760b

    Yep, hoping to order online. I'll see if someone can confirm on another thread.
  12. C

    Newbie owner - Terex 760b

    Thanks. I will check out the E-brake and follow your routine. I saw the adjustment while get dirty yesterday under the loader. I managed to find the cross-reference to Wix oil and hydraulic filters and changed those fluids yesterday. 4WD is a dial switch...3 position. Dumb question...
  13. C

    Newbie owner - Terex 760b

    Catback, thanks for the advice. Consider it done. I'm already planning on doing the hydraulic, engine, tranny and coolant tomorrow. Just hope I can figure out cross reference oil, hydraulic ,tranny and fuel filters to purchase locally. I'm a bit in the blind on cross ref part numbers as I...
  14. C

    Newbie owner - Terex 760b

    Greetings and happy to be a new member. I just purchased my 1st backhoe loader and ended up buying a 2006 Terex 760b with 1300 hours. Appears to be in very good shape. It is for personal use and after watching anything from JDs and Cases felt it was a very good value. I'm using it for...
Top