-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Search results
-
B
Case 450 track assemble question.
This is my first track repair, looking for suggestion on idler shiming -
B
CASE 450 DOZER EXPERT NEEEDED TRACK PARTS HELP
Trying to compare to others to see if this is an issue, I am thinking it may be, the upper roller looks bent down. https://ibb.co/tC9Gdgz https://ibb.co/ZWZFwPw -
B
CASE 450 DOZER EXPERT NEEEDED TRACK PARTS HELP
Just beat off that square plate then? -
B
CASE 450 DOZER EXPERT NEEEDED TRACK PARTS HELP
How does the nut come off the track adjuster rod ? as the threads from the spring bolt are stuck in the nut. I was going to replace the nut but I am unable to get the nut to separate from the track adjuster rod. -
B
CASE 450 DOZER EXPERT NEEEDED TRACK PARTS HELP
Metalman55 My case 450 is different with the spring set up.i get the idea -
B
CASE 450 DOZER EXPERT NEEEDED TRACK PARTS HELP
That makes sense! spring is broke in half. -
B
CASE 450 DOZER EXPERT NEEEDED TRACK PARTS HELP
I have a 25ton press, i think that machine is around 11k -
B
CASE 450 DOZER EXPERT NEEEDED TRACK PARTS HELP
Thank you Tones, What is the high/ low position of spring? I will double-check the offset before bolting back on. there is only one set of holes in the frame and that large bracket. no elongated holes as I can tell would that be the only offset? -
B
CASE 450 DOZER EXPERT NEEEDED TRACK PARTS HELP
Thank you, i figured the spring was under a lot of tension as a front automotive strut. the spring is broken and loose lucky. I am not sure about tightening to proper spec. the heavy corrosion inside the tensioner area where seals ride won't be an issue? or the pitted peeling of chrome on the... -
B
CASE 450 DOZER EXPERT NEEEDED TRACK PARTS HELP
Hello I have a plain case 450 dozer serial number of 3048746, I am working on the right side of the dozer where I have a broken recoil spring, bad idler, track adjuster that won't hold grease. The parts that are currently on the machine has a 7 3/8 spacing on the track adjuster. the used idler I... -
B
72 case 450 track idler question
It's a hobby machine so cost is definitely a concern. To me, I thought the sprocket did not show much wear, That's why I asked what was wrong with it. I definitely agree with tones if this was a commercially used machine to replace everything. I picked up some decent used bottom rollers a... -
B
72 case 450 track idler question
Can you explain what is wrong with the sprocket? -
B
72 case 450 track idler question
Sorry for the long delay got involved in another project. serial 3048746 have this one apart more now, inner bracket on the idler is egged out so the idler is shot and bracket. -
B
72 case 450 track idler question
What's the best way to get the brackets off the idlers? How bad is this track? Thanks In advance -
B
JD 310E loader ball joints
Does anyone have a line on aftermarket quailty ball joint for the hoe and loader? AT124107,AT169087- born2ride
- Thread
- Replies: 2
- Forum: Tractor/Loader/Backhoes
-
B
case 450 roller question
I have a few extra lying around i figured it may be easier to swap the broken end vs weld, maybe not Going to look for a clip later when home -
B
64 Chevy C-60
Does anyone know where I can find a reasonably priced hydra vac unit for my dump? I think it uses a Cardone part no: 51-8011. -
B
72 case 450 Hyd question
thanks, i been starting to get a delayed engagement on the dozer when placing in gear, I was hoping it was related to the low fluid level hyd reservor!