• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. Andy01

    S150 Overheating?

    After 30 mins of light use temperature light comes on and shuts machine off. Gauge is only half way not in the red. Rad is clean and coolant level is good. If i let it sit to cool down it will fire right up and run until it shuts down again. Machine has about 1500 hrs. Any ideas what to look at?
  2. Andy01

    OTT Skid Steer Over Tire Tracks Sand Septic System

    I have to install a raised filter bed septic system for my new home. I have access to a 2wd backhoe, mini ex, and a bobcat S150 skid steer. Would it be worth while to invest in a set of over tire tracks for the skid steer or will I need an actual tracked machine to get the job done. This will be...
  3. Andy01

    Genie z45/25 Blinking red light on ground control panel

    Is the red light below the key supposed to be flashing or on at all when machine is running?
  4. Andy01

    580c

    I just noticed a new leak today or an old leak that got worse today. It is on the largest rubber hose that goes to loader control valve. The hose looks relatively new but there are 4 other hoses in front of it that block access to it. I would like to have a new hose on hand before I disassemble...
  5. Andy01

    580c loader rises when using back hoe

    If I dig using back hoe for 30min sometimes the loader will lift 2' off the ground on its own not always. Any ideas what would cause this?
  6. Andy01

    580 C Loader Float Position

    I know that pushing the loader control all the way forward it is supposed to lock and it should float. My loader control seems very sloppy, I can move it 6" in any direction with nothing happening. It locks in all the way forward but loader will slowly lift the front of tractor instead of...
  7. Andy01

    Ford Super Dexta Cold Starting Problem

    -30 C here last night. Tractor plugged in but did not want to start. It has an inline injector pump. I have heard about an excess fuel button as a cold starting aid. I don't know what to look for or how to operate it. I did notice a white plastic lever near injector pump it rotates about 90 deg...
  8. Andy01

    Case 580c injectors bubbling at head

    I have a Case 580c with the 207 engine with pencil type injectors. It starts and runs well but I noiticed bubbles forming around injectors at cylinder head. I don't think this is normal, is this something that needs to be addressed and why? How big a job is it to fix it.
Top