• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. U

    580c face lift

    Insane what paint and decals will do to an old machine. Been dumping some money into it this summer just ordered a 12’ high by 12x20 car port so it doesn’t live outside in the weather. Still need to paint the buckets and rims and the inside of the cab
  2. U

    Need a pin for a580c D71870

    Looking for a pin the hooks the backhoe frame to the frame of the machine part number is D71870
  3. U

    Leaking coolant need part name

    What is this part called?
  4. U

    580c backhoe forks

    been looking for actual fork attachment for my 580c can’t find any. I’ve been using the Triton forks but they are a pain the Butt. Anyone have a lead on one or any good custom built ones?
  5. U

    580c 207 intake manifold made of?

    is it aluminum or steel? Easy to weld?
  6. U

    30” bucket too big?

    is a 30” trenching bucket too big for a 580c
  7. U

    What size shanks? 580c

    im replacing the shanks on my 580c. Does it take the 3/4” shank or 1”? It looks like 3/4 but I just want to make sure
  8. U

    580 transaxle fill location

    Did brakes and backing plates (carrier bearing seals) now I need to put fluid/oil back. What do I use and where do I add it? The manual says either 85 or 90w Just double checking
  9. U

    680 backhoe bucket fit on a 580c?

    680 backhoe bucket fit on a 580c?
  10. U

    differential lock seal

    tore the brakes apart. The right side was coated in grease. I didn't happen to notice a seal on the diff lock housing but found one online. I didn't happen to notice a grease fitting on the diff lock housing do I just pack the grease in before bolting it back together? 1979 580c....Also anyone...
  11. U

    bearing carrior seal

    Are these cracks a concern? If not can I just replace the seal or do I have to but the whole thing for 200 bucks a side?
  12. U

    Coolant temp sensor

    Can anyone give me the location of the coolant temp sensor location? Possibly a part number also.
  13. U

    3 spool valve loader case backhoe????

    Anyone have a 3 way spool valve for a 580C,D,E? I bought a 4in1 bucketed for my 580c and need to track down a 3 way spool valve. Thank you Adam Forsythe
  14. U

    580b loader bucket on a 580c

    Will a 580b bucket fit on a 580c?
  15. U

    adding a 4 in 1 to a 580c case

    I found a 4in 1 bucket off a E machine and what do put it on my 580c. What am I going to have to do to hook it up? Another level with a entirely new spool valve or can I just add a different spool valve with a relief to run the clam?
  16. U

    whole machine hydraulic rebuild 580c

    Almost every seal on the 580 has been leaking ever since I bought it. Well I was moving a snow pile and I lost my boom swing only when swinging to the left. So during the very late part of winter I will be tearing the machine down to rebuild all cylinders. I have noticed when using the...
  17. U

    580c hydraulic pump removal

    So the two things I didn't want to happen happened. Rear flat tire...bit the bullet and bought new tires. Now my fan belt broke went to change it and I'm having a hell of a time getting the pump out it wiggles but doesn't move enough . Am I going to have to bite the bullet again and drain 22gals...
  18. U

    580c fan belt size

    I cant find the fan belt size for my 580c I measured the old one and it is 50" but im scared of streaching so i just want to make sure i buy the right size.
  19. U

    Will this bucket fit...

    I'm looking at a front bucket that is on a 580e. I just want to make sure it will fit my c
  20. U

    Mounting rear tires

    I just bought 2 new rear 14.9x24 tires. I was able to get the old one of using big pry bars. But not able to get the new one on the rim. So I ordered 2 ken tool 37" mounting bars. I'm using dawn as lube. Any tricks?????
Top