• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. G

    853H will not reverse Hyds

    spool valves look ok Where are the diodes that are in the wiring diagram? are they in a box somewhere or in the harness?
  2. G

    853H will not reverse Hyds

    right, but hitting the switches on either stick still makes the post hole digger go the same way. " Did you unscrew the spool valve and take it apart or just replace the solenoid coil?" I just replaced the the coil, i'll have to unscrew it and see what I find. Thanks
  3. G

    Water well drilling with a skid steer

    Our drill stem was 2 1/4 and weight about 60 pounds per 10 feet lengths. The swivel is made from 4 inch pipe and a couple of flat plates and 2 pieces of rubber. We drilled a 1 inch hole and welded a nipple to connect a hose to it to circulate water and Benoite. The plates we bored 2 3/8-2 1/2...
  4. G

    Water well drilling with a skid steer

    That is the swivel I have all the info at the shop, i'll get it tomorrow. I know a "real" well driller can put 10's of thousands of pounds on the drill but the time I think it would make a difference is when you hit a rock. The water and drill do most of the work. at times we were drilling 15...
  5. G

    Water well drilling with a skid steer

    The photo in the last post was the first hole before we hit water. after hitting water we needed to start recirculate Benoite, which created these
  6. G

    Water well drilling with a skid steer

    HI, 100 feet is not the limit but we hit something that would take about 1 hour to go 1 inch. They installed a 3 ton geo unit with 400 feet of tube in each hole. It is the same process as drillling for water, we hit water several times at different depths. see if i can one of the pictures
  7. G

    Water well drilling with a skid steer

    Ok, I forgot all about this post and saw it today so I figured I would update it. We,(the 2 of us) finished drilling the 3 holes, all 99 feet deep. I wanted to go 110 feet but it would stop drilling at 99. second hole finished with only a problem with a pump seal in the trash pump we were using...
  8. G

    853H will not reverse Hyds

    HI I have a bobcat 853H that will not reverse hyds. Changed out solenoids and didn't make a difference. no matter what button i push, they flow the same way. tried this on a post hole digger and a rock hound. The rock hound needs to reverse to dump the bucket. Where do I start to look? Thanks
  9. G

    new guy needs help 7753 arms won't lower unless aux hydro's is enganged

    OK Found it now I will check it out Thanks
  10. G

    looking for a 7753 right control handle # 6680414

    HI Need to get a new control handle for a 7753. Is there any other places than a Bobcat dealer to get parts? the parts guy gave me the part number 6680414 saaid it would take a week to get. trying to see if there are any other options Thanks
  11. G

    new guy needs help 7753 arms won't lower unless aux hydro's is enganged

    OK thanks, I will look for it
  12. G

    new guy needs help 7753 arms won't lower unless aux hydro's is enganged

    The rh trigger switch seems fine. Starting to wonder if I got a bad part (solenoid) from the dealer? the original problem has been fixed and it only went into reverse the one time, just keeps shutting off I did hook up a 863 but the aux hyd's will not reverse on it seems it had a fire in...
  13. G

    new guy needs help 7753 arms won't lower unless aux hydro's is enganged

    "Interesting side note, I throttled up to spin the bit faster and it has not malfunctioned " I spoke too soon, it stills cut out
  14. G

    Water well drilling with a skid steer

    I just finished drilling 1 99 foot hole 6.5 inches deep, at 59 feet on the second I am using a post hole digger attachment with a home made swivel and a rotary bit off ebay(less than 100 bucks) got lucky with the drill stem, there is a directional borer who had about 150 foot of old drill pipe...
  15. G

    new guy needs help 7753 arms won't lower unless aux hydro's is enganged

    OK, I ran the machine this morning and had the aux hyd's on, but did not use them the lights stayed on about 20 minutes I did some other stuff and came back to doing my hole and after about 15 minutes of running the aux hyd's the bit reversed I didn't even realize it at first, i still had my...
  16. G

    new guy needs help 7753 arms won't lower unless aux hydro's is enganged

    OK, I will try this on Sunday Thanks
  17. G

    Bobcat 756 no fuel to the lower filter

    yes this job sucks!!! wish I had the thread on the pick up tube a year ago, very well put together
  18. G

    new guy needs help 7753 arms won't lower unless aux hydro's is enganged

    I went ahead and replaced solenoid and stem BUT now the aux hyd's will just cut out, green lights go out and flow stops not sure if it was doing with the other problem or started after changing it out
  19. G

    new guy needs help 7753 arms won't lower unless aux hydro's is enganged

    THANKS!!!!! cleaned it up and now it is working!! I did not think it would be this easy
  20. G

    new guy needs help 7753 arms won't lower unless aux hydro's is enganged

    still have the problem
Top