• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. D

    komatsu D41P-6 transmission filter

    my dozer calls for a 23S-49-13120 filter which komatsu no longer supplies. I tried an oil filter company in oklahoma city and none of their suppliers could cross reference it either. komatus sells a $500 upgrade kit to upgrade to a $117 filter that they still sell. Is that my only option?
  2. D

    Esco ultralok teeth

    I feel Iike esco is robbing me. I'm not used to a $1000 bill because my reeth are worn out! What are my alternatives? Can I just weld replacement teeth on? Is it better to have the bucket converted to different teeth? Maybe just buy a different bucket?
  3. D

    komatsu pc210 VGT turbo 6.7 cummins

    My Komatsu excavator is low on boost pressure and the more i learn about this VGT turbo the more I think the system is much more complicated than it needs to be. Id like to throw the vgt off and put on a traditional turbo. Can I just plug off the oil lines that control it or would I need to link...
  4. D

    Komatsu pc220-6 diverter valves.

    I'm assuming they are diverter valves. I've never seen them before. They were on a 220 that is for sale 5 miles from me. They are in the aux circuit. One has what looks like a pressure relief valve built into it and a line that I think teed into case drain on swing gear. The other one had a...
  5. D

    Komatsu D41p-6 motor removal

    It looks to me like I've either got to pull radiator or dash and floorboard. Can it be done either way? If so which is easiest?
  6. D

    Komatsu D41E tracks on a D41P

    I have a d41e parts dozer that has good tracks and the tracks on my d41P are getting pretty worn. Counting the links im getting 41 on E and 44 on P. could I just buy 2 more links and a master to make it easy?
  7. D

    John deere 790D slewing issue

    Would kind of grind to a halt when swinging. It was not consistent on where it stopped. I swung it until it hung up and left bucket up a little off of the ground with a safety chain. I could swing it a small amount by hand so swing bearing seemed fine. When I pulled the swing motor the planetary...
  8. D

    Komatsu pc210-10 swash plate sensor

    My excavator is throwing a code for swash plate sensor. I thought I could test it with an ohm meter buy apparently I'm wrong. How does this thing work? Is there an easy way for me to test them?
  9. D

    komatsu pc200-3 thumb to pc210-10

    I've found a progressive thumb off of a pc200-3 in Washington. Im trying to figure out how much modifying Id have to do to put it on my pc210-10. Trying to figure out pin sizes for starters.
  10. D

    Komatsu pc210LC-10 crankcase pressure code.

    Against my better judgement I bought a pc210 today that is displaying a code for high crankcase pressure. The seller just lowered the price so far I just couldn't resist. It has 6500 hrs. He bought it at auction and when he used it it threw the code in the first 15 min. He said it also asks for...
  11. D

    I'm considering a 180G but scared of EGR DEF

    I'm wanting to upgrade to a newer more reliable machine but I've had bad experience with EGR in powerstroke 6.0 motors. Should I worry about that on a John Deere 180G? Could I just delete it and have no worries? Is DEF system on all of those too? Is it troubling? I'll have a chance to check it...
  12. D

    Komatsu D41p-6 slips going forwards

    I think my transmission went out, but I'd like to figure out how I can be sure before I tear it out. It's weird to me that it slips in all 3 gears forward. I'd have thought it would have been in just one gear. So that makes me wonder if it could be the steering clutches slipping instead. But...
  13. D

    Case 95xt right side won't move

    I went to unload my skid ateer from trailer and right side does not move. I tried applying and releasing parking brake. Parking brake indicator does not work but it does apply the brake on left side when I activate the button.
  14. D

    Hitachi zx200 with blown motor

    There is a zx200 for sale near me with a blown motor. I searched these forums and found reference to 06 and newer units having motor issues. It said there was a computer fix as well as different pistons. Anyone know the specifics on this? How can I tell if this machine is 2006 or newer?
  15. D

    Komatsu d41p avance hydraulics getting hot

    Twice I have knocked the hydraulic cap off during clearing jobs. Today was the second time. The hydraulics have always run warm on this machine. But it seems to have gotten a bunch worse. I'm worried that I may have gotten leaves in it when I lost the cap. I have a friend that had one that lost...
  16. D

    Komatsu d41p final drive disassembly

    I got the pinion shaft out but I'm having trouble getting the sprocket shaft out. Does it take a press?
  17. D

    Komatsu D41P-6 sluggish turning left

    I've got the left turning brake adjusted a bunch tighter that the right on, but it is still weak turning left. I've tried to look the turning control valve up on komatsu parts online but I can't find it. I suspect it is in the travel control folder, and it wont open for me. I see I have a little...
  18. D

    John deere on RitchieSpecs

    I went to pick up a John Deere 690B so I checked the width on RitchieSpecs to see if I would need an oversize permit. It was listed at 7.92 feet. Got it up on trailer and it looked more like 10ft! When I got home I looked up my 790D that I know is 11ft and it was listed at 9.83. Is this rare, or...
  19. D

    JOHN DEERE 790D seized up

    I bought a seized up 790D today. My thought were to pull off the pumps to see if they were seized or the motor. If there is an easier way to determine which it is, I'm all ears.
  20. D

    Pc200-5 torque control valve solenoid

    Machine was operating normally when I parked it. A few minutes later someone else tried to use it he said it had no strength. He thought it was because it was low on hydraulic fluid. I added fluid and it took 10 gal to bring it up to the proper level. I fired it up and it acted like it was...
Top