• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. M

    Older Deere 850 dozer Wont go straight, always turns to the left

    I have been treating it as a straight 850 dozer, could not find any parts with 850-D. The serial number is 365030T
  2. M

    Older Deere 850 dozer Wont go straight, always turns to the left

  3. M

    Older Deere 850 dozer Wont go straight, always turns to the left

    We have a 1981 Deere 850 dozer that wont go straight. When I go forward for 2-3 meters, it starts slowly creeping to the left. After sometime, it keeps going to the left more sharply. Same thing happens when you put the machine in reverse. Any ideas??
  4. M

    Anyone know what this control valve is for ?

    We buy quite a bit of surplus parts for our inventory. Recently received this one, and does not look like anything i have ever seen before. The ID plate has been torn off, so I have no idea what it could be for. Any ideas of what machine it could be for?
  5. M

    Parts were stolen off of my Vermeer RT700 trencher! Anyone know where I could find used??

    I have already tried that. That was the second place I looked
  6. M

    FOR SALE: Atlas Copco T20R drill, Manitowoc S282 self erecting crane, Trackmobile rail car mover

    We have the following machines for sale. A couple of these machines have been sitting for a while, and we are very motivated to sell. 2010 ATLAS COPCO T20R ROCK DRILL, LOW HOURS, RADIO REMOTE CONTROL, 4 CYLINDER CUMMINS DIESEL, 360 DEGREE DRILLING IN ALL DIRECTIONS, $100,000 OBO MANITOWOC S282...
  7. M

    Parts were stolen off of my Vermeer RT700 trencher! Anyone know where I could find used??

    A while back someone stole the joystick ( p/n 257538001 ) and a control module ( p/n 255215001 ) off of my Vermeer RT700 trencher. I sell equipment so I had the machine in our lineup. One day we had a customer for it, and we went to start her up. Low and behold someone had stripped these parts...
  8. M

    Bobcat S590 engine

    I will have to check on that warranty. Leaning towards that it will not have warranty
  9. M

    Bobcat S590 engine

    We bought a Bobcat S590 at auction that has a bad engine. Need to replace piston rings, rod and main bearings. I have bought many parts for Bobcat kubota engines and they were easy to find. When researching this engine, it turns out it is not kubota but a Bobcat D24NAP engine. Upon doing some...
  10. M

    Dresser Dozers TD-15 E Any Good ?

    I was trying to find an undercarriage for a International TD20. At the end I did up finding some new options here and there but sure took a long time to find.
  11. M

    rust proofing heavy equipment parts

    We have a large salvage yard, and recently built a large warehouse to store heavy equipment parts. Pumps, axles, pins, cylinders and engine parts like crankshafts, engine blocks, pistons etc. Does anyone know of a good product to use for rust proofing parts?
  12. M

    Caterpillar 943 hydrostatic transmission, where to find one ?

    Been looking all over the place for a Caterpillar 943 19Z hydrostatics trans. I´ve found some, but they want $6,500 plus core and for me it is just to much to spend on this machine. I actually just need the pistons, barrels and valve plates but they cost about $5,000 through CAT. Ideas anyone?
  13. M

    For sale: Cedar rapids asphalt plant

    Asphalt Plant and Mixing Unit Mdl H-50C Cedarapids 4 Bin & Feeder M-108P-4 Control House Barber Greene Fabric Filter CR-08 Cedarapids Dryer 8026, aprox: 180TPH Send me a message if you are interested.
  14. M

    Volvo EC290BLR ECU issues [ pictures ]

    So we plugged in the new, original, OEM volvo ecu. Who would of guessed it..? The machine still doesn't operate. Back to sqaure one
  15. M

    Cab removal, D5H

    We are containerizing a CAT D5H dozer. We have to remove the cab, so it fits inside the container. My question, can you still operate the machine if the cab has been remove..? I am thinking no, because I believe all the electrics will go with it. But I could be wrong, stranger things have...
  16. M

    Trimble GCS600 Caterpillar Excavators

    We have a Trimble GCS600. I am not to familiar with it. I have a friend that is wanting to use this with a Caterpillar 140H. In the broshures it clearly says that this system is for excavators only. How can I make it compatible for use on a Caterpillar 140H..? Or will this not be possible?
  17. M

    Freight Forwarding from Miami to Africa!

    Could be.
  18. M

    Freight Forwarding from Miami to Africa!

    They did. They were cheaper than anybody else that qouted me on this machine. They specialize in ocean freight for construction equipment, so they always had answers for me on every question I had. The vessel went direct to the destination port so it didn't take very long either. They have...
  19. M

    Galion / Dresser parts issues

    Who owns Galion Dresser motorgraders right now. I need to buy some new parts and I can't find a place to buy them right now...What to do?
  20. M

    Freight Forwarding from Miami to Africa!

    Pictures coming soon...!
Top