• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. N

    Hyundai Robex R200LC-9S Manuals

    This is golden. Thanks so much Makar!
  2. N

    Hyundai Robex R200LC-9S Manuals

    So, reviewing the serial plate again, the plate states the machine is a R180LC-9S/R200LC-9S
  3. N

    NielV

    True that. We had to replace about a third of the machines hoses, and still we had aeration problems after the flush. Very important to change all the return line o-rings and gaskets too. Thats where the aeration was originating from, and also some return hoses. We removed avery last...
  4. N

    NielV

    Thats the main valve bank. We were busy removing it for repairs. We had a hydraulic hose and hydraulic pump failure on the machine, and debris entered the valve bank, seizing some of the spools. Had to change out a whole segment of the valve bank due to the damage it had.
  5. N

    NielV

    With the Hard Rock Mining (Chrome and Platinum) where we are, the buckets are quite protected.
  6. N

    NielV

  7. N

    NielV

  8. N

    NielV

    Thanks for the warm welcome. I have some pictures of Hydraulic flushes we did recently...
  9. N

    Purchasing first TLB and need advice

    Hi Magnus. My opinion, I tend to side with @crane operator regarding rather purchasing a good used machine, rather than a new machine with a limited warranty. Out of personal experience, the new electronic controlled machines are stronger and more nimble, but they do tend to give more...
  10. N

    Hyundai Robex R200LC-9S Manuals

    Not according to the serial plate. It's stamped as R200LC-9S. It has the Mitsubushi S6S-DT engine in.
  11. N

    Bell Equipment- parts supply

    Hi Michael. We are based in South Africa, not to far from Bell Equipment themselves. I do a lot of work on the B, C, D and E Series machines as an independent supplier. Expanding to Australia is also on the cards for us some time in the future, but we would be able to assist with your needs...
  12. N

    Bell Equipment- parts supply

    Hi Mowingman. The Bell trucks being John Deere trucks are only true for the D series. They were also branded as Hitachi trucks in Australia
  13. N

    Bell30e recalibration of bin tip sensor

    Extraction form the manual: 1. Make sure that there is enough room above the bin to be able to lift it fully. Look for any hazards like power lines or overhead obstructions. 2. Make sure there is no one directly behind the truck as the bin may hit them as it is lifted. If possible, cordon off...
  14. N

    Bell30e recalibration of bin tip sensor

    Hi Cue. What is the serial number of the machine? I have manuals regarding the machine, But I need to know what PIN model the machine is. Can share them with you.
  15. N

    Hyundai Robex R200LC-9S Manuals

    Good day all. I recently came across a Customer with a Robex R200LC-9S excavator with a ton of work to be done on it. Has anyone possibly got the Parts and Service Manuals on this machine, that they are willing to share, as it is extremely difficult to find on the internet. Thanks in advance.
  16. N

    NielV

    Hi Everyone. Greetings from South Africa. Currently I'm in the industry of repairing, rebuilding and maintaining Heavy Duty Earth moving machinery, and recently we've started up an engineering sector in the company where we do line boring and bucket repairs. I used to work for Bell Equipment...
  17. N

    New member here to say hello first

    Thanks. I used to work for Bell Equipment for a number of years as a Technical trainer, of which I would train the technicians on Bell, John Deere, Liebherr and Bomag machines, so obviously you grow to like the brand above others. After leaving the company and starting up my own, I've learned...
  18. N

    New member here to say hello first

    Hi Everyone. Greetings from South Africa. Currently I'm in the industry of repairing, rebuilding and maintaining Heavy Duty Earth moving machinery, and recently we've started up an engineering sector in the company where we do line boring and bucket repairs. Hope to get to know some of you...
Top