• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. dhutch

    Deere 160C wiring harness repair, I figured out a source for connectors if anyone needs help

    PM me with what connector your looking for
  2. dhutch

    Volvo D6E engine manual wanted

    Looking for an engine manual for my Volvo EC210CL with the D6E engine.
  3. dhutch

    Volvo EC210Cl bucket curl issue

    I was posting this under another thread, not related, so thought I'd move it to help others out. Here's my issues: Bucket wont curl in when digging hard clay or pulling on a stump without working other circuits to help it out Bucket curl stuck in the ground (hard Clay) #1 pump is around 3500...
  4. dhutch

    Volvo 210cl hyd cylinder piston removal

    What's the best tool to use to remove the piston on a hydraulic cylinder? I'm trying to rebuild the bucket cylinder. I've got the jam nut removed, but can't get the piston to budge. I know it threads on in the opposite direction from the jam but. TIA.
  5. dhutch

    Volvo EC210Cl overheating

    Finally got a chance to run this new to me '08 210C. After about 15 minutes, I got the overheat shutdown engine message. Temp gauge was pegged out. I shut it down and checked with a temp gun. The Head was 221 to include the head side of the thermostat mount area. The thermostat housing was...
  6. dhutch

    volvo 210cl hydraulic filter particles

    I drained the milkshake colored hydraulic fluid today and pulled the suction strainer. The pic shows what was in the strainer. Mostly black rubber pieces and some white teflon. Very few ferrous metal slivers and just a few aluminum slivers. What are your thoughts?
  7. dhutch

    Volvo EC210CL Elec issue help

    Ive recently purchased a EC210CL, VCEC210CE0011XXX, that has a PWM9102-05 code with associated slow movement. I've read through other posts on this site and other places and started digging through the service manuals I just picked up. One question I have is where is the physical location of...
  8. dhutch

    volvo ec210cl parts book

    I'm trying to find a way to look up parts for this ec210cl. Is there a website that's easy to access or do I need a parts book? If I need a book, where can you find them? Is one for an ec210 the same? Thanks.
  9. dhutch

    Volvo EC210 info

    Ive purchased a 08 volvo EC210C. The side panels show 210CL, the vin shows 210CE. In searching I'm seeing a 210C and then the 210CL. Whats the difference with the "L"?
  10. dhutch

    Dump truck or trailer

    Looking for thoughts on using an end dump trailer for my business that I started a few years back. I do dozer and excavator work part time. I’m not sure a dump truck would be the right choice since I’d have to have insurance and tag for something else along with my lowboy semi. I’ve pulled 39...
  11. dhutch

    Deere 160C LC help

    I've recently purchased an 06 Deere 160c lc. A few issues I'm having, when traveling, I can only turn the engine speed up to about 3/4 throttle. Anything past that and it reduces the travel speed. I read somewhere that the throttle switch could be bad? My battery light stays on all the time...
  12. dhutch

    Heavily rusted track frame help!

    Question for those more experience than me, which is everyone. I'm looking at purchasing an excavator that has a lot of corrosion on the track frames. It's mainly the thinner metal that has some rust through, but not so much of the heavier pieces that make up the main frame of the track frame if...
  13. dhutch

    Bidding a job and specifics

    I'm looking for advice, opinions or answers to a few questions I have on bidding a job. I want to make sure I'm not cutting my throat by underbidding, but also not overcharging the customer. I'm a veteran, still doing about the same job that I did on active duty, but now as a government...
  14. dhutch

    Samsung SE130

    I'm looking at purchasing a Samsung SE130 excavator with close to 10000 hrs. The machine runs good and supposedly no issues. Sheet metal and glass is all good. Any thoughts on the machine, known issues, etc? I know parts are a little more difficult to come by for specific items like electronics...
  15. dhutch

    Tandem Dump and tag trailer to move a dozer???

    I'm looking for advice on moving my equipment before I buy the wrong thing. I have an IH TD-15C dozer that weighs in at 33,000 lbs. I'd like to have a tandem axle dump truck to haul gravel etc, something like a W900A KW with a 400 cummins, and a 20-25 ton tag trailer. Would a combination like...
  16. dhutch

    Dresser/IH TD-15C specs

    I'm looking at purchasing a Dresser TD-15C and was looking for the specs, weight, length, width, height and blade width of a semi-u blade both straight and angled for moving? Any help is apprecaited.
  17. dhutch

    Need a Dresser 175C moved from Covington Ga to Cumberland City TN

    Buying a loader in Ga, looking to get it moved soon, send me a pm with a quote, mileage is appx 370. Loader will not run, bucket is off the ground and loader will roll, will need a winch to load it. I have equipment available to unload it.
  18. dhutch

    Pros? Cons? Dresser 175C

    I'm looking to upgrade from an older cat loader to something newer. I've found several Dresser 175C's that Im interested in. Looking for advice from those that have been around or run these in the past to provide any and all input on known issues or other things I should watch out for or be...
  19. dhutch

    Thoughts/advice on keeping 955H

    I have a '63 model 955H that I'm trying to decide if its worth while to replace the pads and rails on it or sell it as is and get a 955L, 175C or similar loader? The rails are well worn out, the bushings are worn through. The sprockets look good as well as the rest of the undercarriage. I was...
  20. dhutch

    955h tracks same as??

    Im looking to replace the tracks, or at least the rails on my 955h 60A. I use it around the farm and dont really want to buy new because as soon as I do the finals or something else expensive will go out. The machine runs good, but the rails are worn through to the pins. Will rails from a 951B...
Top