• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. A

    Reverse speed/pressure?

    Hi, I've got a Case 1845C that has only 700 hours. It runs fine in forward with both drive motors performing well. However, when I reverse one side is slower than the other and the overall speed is much slower than when going forward. Worse when hot and if I am raising the bucket the machine...
  2. A

    Block heater for Case skid loader

    Heater I have a 200 watt heater stuck to the side of the head. This keeps number 1 and number 2 hot, so it starts easily. I've also had good luck with the lower radiator hose heater. Here's one on Ebay...
  3. A

    Block heater for Case skid loader

    Heater HI, Just take off the lower radiator hose and get a heater that will fit into the hose. It takes about 10 min to install one of these. You just cut the hose in half, insert the heater, tighten the clamps and reinstall the hose. They work great. I'm even lazier. I bought a magnetic...
  4. A

    1845C heater and float

    HI, Z2898, I'm not sure of the year. How do you tell? My float detent looks a liitle different than the one in the picture. I have a flat plate that had two bolts across the top of it. The valve rod sticks out of the plate and one of the balls in the plate was all rusted. I used heat...
  5. A

    1845C heater and float

    Hi, I finally took the time to dig into the float problem. I took off the cover on the back of the valve assembly. Pretty hard to get at, but it came off. Found out that it has two detent balls. One was OK, but the other one was stuck. The stuck one was mounted on the end of a Threaded...
  6. A

    Opinon wanted 1845C or BC 853?

    Hi, I am torn between the 1845C and BC 853. The 853 has the door and enclosure, heat and an ongoing problem with the bucket arms and worn bushings. ( see other post). It has 4800 hrs and RUNS GREAT. Cosmetically it looks tired. It pops off with out needing glo plugs and seems to be a good...
  7. A

    Oops

    HI, I finally just put a come a long around the arms, pulled them together and welded the cracks around the middle or the arms that was allowing the bucket to drop off. It was really cracked around the middle of the arms where the hyd. cylinder attaches. Now the bucket does not move side to...
  8. A

    1845C heater and float

    HI, I am wanting to add a heater on my 1845C. Does any one know of the best location of heater hoses on the engine block? I believe I have a Cummins engine. I can't get the float to work on this machine. Any suggestions? I've spent about an hour twisting the left handle to the float...
  9. A

    Bobcat T200 won't shut off

    HI, Thanks for the input, but it was the solenoid. I can't beleive how much BC gets for parts. I'm going back to Case. I've had several 1845's and I think they are the best. Dave
  10. A

    Oops

    I was trying to extract a rock and suddenly, my bucket fell off!!!!!!!!!!!!!!! I hate when that happens. I have a Bobcat 863 and found that the bushings in the Quick Tach are worn and apparently that put a side force on the lift arms that cracked the welds around the center support for the...
  11. A

    853 Queston

    HI, I've got a 853 Bobcat question. When you raise and lower the boom, the bucket changes it position realitive to the booms. So if you start out with the booms low and the bucket level with the ground, raise the booms to the highest position, the bucket will still be level with the ground...
  12. A

    Case 1845C and Quick Tach

    HI, I was asking if the 1845c would fit Bobcat and Case attachments and uthers that use the Quick Tach standard for attachments. I understand the Gehl and others still user thier own attachment techniques. I don't think the machine that I am looking at has the hydraulic feature for doing the...
  13. A

    Case 1845C and Quick Tach

    Hi, I'm wondering if the Case 1845C has the quick Tach attachment? Thx, Dave
  14. A

    Changing tracks on a Bobcat

    HI, After fighting the removal and reinstall of one of the tracks on my T200, I tried a different approach on the second one. It took me about 40 minutes total including some liquid refreshemts to keep me going. (Note: all of the specialized tools mentioned are available from my shameless...
  15. A

    Bobcat T200 won't shut off

    Won't shut off HI, I have the keyless option and when I push the stop button the machine shuts down, but the motor keeps running. I have jumped the fuel solenoid relay and the motor shuts down. Apparently, the controller is not sending the signal to the relay to shut off the motor. I am...
  16. A

    Bobcat T200 won't shut off

    I have a 2002 T200 that won't shut off from the electronic control panel. I have tested the control relay and the fuel shutoff solenoid and they are working fine. It seems the computer is not sending out the shut down voltage when you push the stop button. I assume this will be over a thousnd...
  17. A

    Need help to Move T200 from TN to MN

    Hi, The skid steer is on it's way. Thanks for the help. Dave
  18. A

    Need help to Move T200 from TN to MN

    HI, I'm looking for some help to move a Bobcat T200 from Cleveland TN 37323 to Cottage Grove MN 55016. We have loading docks at both ends, so we the skid steer can go on a flat bed or a semi. I am looking for a better price than the brokers offer. Dave
  19. A

    lets see if this works

    You folks seem to be very testy.
  20. A

    testing 123

    click click
Top