• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. S

    Bobcat 753 g 2003 error 32-39

    Hi, Yes it try to calibrate with the old actuators for perhaps 6-7 seconds before I get the 32-25 code. With the new actuators it will try calibrating for just 1-2 seconds. If I hold the actuator a little puched sideways when it´s mounted loose against the valve-body I maybe can do the...
  2. S

    Bobcat 753 g 2003 error 32-39

    Ok, when I try calibrate with the sticks I hear that the actuators moves alot then I get the error code 32-25 ACS calibration failure. It’s when I try the old type. The new type also moves but it stops with actuators not in neutral.
  3. S

    Bobcat 753 g 2003 error 32-39

    Hi, Thank you for the valve brakedown-file! I have made som progress. Changed the springs to the spools and the new ones are much longer than the old ones. (I double checked the number so maybe they have updated the part. ) Remounted the spools with the endcup and tried the actuators on the...
  4. S

    Bobcat 753 g 2003 error 32-39

    Hi, I don´t have the correct parts breakdown list for my snr 516227178. Can not use the adress you gave me so maybe that´s just for US?. Do you know if you can try the acuators to the hyudral package before i connect all the hoses? Thinking about trying it at the side with all the cables...
  5. S

    Bobcat 753 g 2003 error 32-39

    Hello again and thanks so much for your answers! I have purchased the new actuators from Bobcat. They should be pre programmed and since they have a reference voltage between 1.8 V to 2.2 V, they should also be correct. I have removed the hyudral package and removed both lift and tilt spool...
  6. S

    Bobcat 753 g 2003 error 32-39

    I actually didn't know you needed to?
  7. S

    Bobcat 753 g 2003 error 32-39

    Hello again and thanks for your tips! The cables in the connector look very good. I've gotten the lift to go a few times now when the lift actuator is a little loose. Like this, while starting the machine I try to push the lift actuator sideways. Either the coil moves sluggishly or the actuator...
  8. S

    Bobcat 753 g 2003 error 32-39

    Thanks for your answer! I will try your ideas :) I have also shifted the acuators place not just with cables but actually the hole actuators. I have new seals but I have read that if there is a leak you can get that the actuator have more resistance and give you error code? I have the Float...
  9. S

    Bobcat 753 g 2003 error 32-39

    Thanks for your answer! I will try your ideas I have also shifted the acuators place not just with cables but actually the hole actuators. I have new seals but I have read that if there is a leak you can get that the actuator have more resistance and give you error code? I have the Float...
  10. S

    Bobcat 753 g 2003 error 32-39

    Hi, Have loost against this machine Checked the wires between acuators and ACS controller and they look like new. Also Checked with Ohm meter. Installed two new actuators and a new ACS controller. Got the lift and tilt to work three times. New error code 32-39 Tilt actuator not in neutral...
Top