• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. A

    T250- Lift arms slowly drift up when in float mode

    I found and solved the issue after pulling the spool out, yet again. The detent adapter was not seated completely onto the washer, per attached photo. The washer was centered and I originally torqued the adapter to the 100 in-lbs manual spec but don't recall if I checked if it correctly...
  2. A

    T250- Lift arms slowly drift up when in float mode

    I replaced leaking spools (lift and tilt) on my manual Bobcat T250. The new seals cured the valve body leaks, but when I kick the pedal into float mode , the detent locks in fine, but I noticed the lift arms slowly drift up a few seconds later. If I press the pedal slightly more forward and...
Top