• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. M

    Genie GS1930 NO FUNCTION ON THE GCOM

    Well thanks for the response, i finally got back to the machine today, and we uploaded the software and still .......nada..... GCON did its thing no codes no noise , so i pulled the ECU " Those plugs are tough on the fingers" and swaped it over with another machine .... everthing is working...
  2. M

    Genie GS1930 NO FUNCTION ON THE GCOM

    Hi there, i have a 2013 Genie GS1930 serial number GS3013A- 119666 which just last week suffered some problem on the GCOM, the push buttons do not operate the lift/lower function if you switch to PCOM everything is working perfectly. i just got hold of some information from Genie and there is...
  3. M

    Case 1000D

    My Father owned among other things a old late 60s era CASE 1000D Track Loader with 4in1 bucket and 3 Tyne Rippers, from memory it was about 100hp and weighed around 10te, probably more sized to a 951 ???. When you sat in the seat you had a tower between your legs that had all your travel...
  4. M

    Is this the CC8800twin

    I would be sure they have already got all the information needed to build one !!!!
  5. M

    Is this the CC8800twin

    I have read about it, and seen factory photos, i know that there is 2 machines possibly 3 out there somewhere but have never seen photo's of them working??? until i received this photo....
  6. M

    Lampsons yard in Kennewick, WA

    Another Lampsons Blue in heap on the ground this time in Australia, http://www.liveleak.com/view?i=0ca_1268219058
  7. M

    Line Boring

    A cheap way to line-bore loader frames dipper arms etc, is use a decent pedestal magnetic drill with a pillow block and bearing to support the boring bar at the other end and away you go, with the travel of 100mm + on you mag drill you should have plenty of travel to do in-situ line boring
  8. M

    Buying a D6H

    Dave, i have shipped gear out of the Far East into Australia and yep the Qurantine rules are harsh and that is being kind ... " Santina " is spot on with his statement....!!! try to get AQIS to do a inspection in the load country , we used a forwarder called Agility to start the ball rolling...
  9. M

    Ah? Geez? ..on 500t unit?

    The Crane is owned by Tiong Woon in Singapore cant understand why they needed to put the support under the outriggers, that is why we have so many incidents out this part of the world ...
Top