• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. captcws

    Engine Manual for Renault MIR 06 02

    Have a 94 Mack Midliner CS 200P with the Renault 6.2 lit engine, showing water in the oil, having trouble finding a repair manual for the engine..Suspect intercooler or head gasket.. Anyone have one or know where I can find one?
  2. captcws

    identity of block

    Thanks a million for the information, I'll call and ask them tomorrow what it is used for, I suspect oilfield or something similar.
  3. captcws

    identity of block

    Can anyone tell me the manufacturer of this block and possibly the tonnage. It carries 4-22" sheaves on a 3.500 shaft and the groove at the bottom is approx. the size of a quarter, not worn, probably uses 1" cable or maybe 1 1/8". I suspect it is foreign made can't find anything in the Crosby...
  4. captcws

    Old or Damaged Crane Boom

    Looking for damaged lattice crane boom 35 ton-75ton w/head sheaves. Also looking for a boom of at least 40 ton capacity, manufacturer doesn't matter, minimum length of 35 ft angle or tube
  5. captcws

    Need a Civil Engineer to help design a crane

    Anyone interested in helping design an' A ' Frame crane. Don't need a stamped drawing but just help in determining theoretical capacity using different steel shapes and a few different capacities
  6. captcws

    Pond Dam Repair

    that is the only way, as long as the material is able to be compacted and can be put back in approx. 8-10" lifts, if not considerate mixing soil with betonite 50/50 and walking in with the same lifts
  7. captcws

    Wanted, 2 drum American, Clyde or other hoist

    Anyone know of a used two drum hoist gas or diesel to be used for lifting spuds on a barge available? Hopefully it would have been used for a stiff legged derrick and would have capability to spool 1000 ft of 3/4" or 7/8" inch cable on either of the drums, can be manual or air controls, tc or...
  8. captcws

    2 drum american, clyde or other l

    Looking for a used, in fair condition, 2 drum hoist either gas or diesel air or manual controls to mount on a barge for lifting spuds.
  9. captcws

    Wanted: Crawler crane of 35 ton to 45 ton capacity

    Looking for a small crawler crane 35 ton to 45 ton capacity, friction only, similar to NW 25, Linkbelt 98, American 4120, Bucyrus 22 or 25, undercarriage condition not relevant, good boom and upper works most important. Model years between 65-75 within 500 miles of B'ham ,Ala.
  10. captcws

    Cat 320L Cab

    In need of a good used cab for a 320L excavator, shell would be fine with window frames or windows, have all internal components. Call 404-259-7124
  11. captcws

    Cazt 225 Excavator

    Looking for a good used 225 Cat in the 15-22K bracket in the Southeast Anyone with information please call 404-259-7124
  12. captcws

    Cable pull pan

    Thanks Alan, I have been checking Machinery Trader for some time and don't see much there that hasn't already been converted to hydraulics, which wouldn't work of course with a cable 8. I do appreciate the suggestions.
  13. captcws

    Wanted Cat 70 or 80 cable pull pan

    Need one or the other for my farm to pull behind my D8H cable tractor. Will consider any condition within 1000 mile radius of B'ham, Al.
  14. captcws

    Cable pull pan

    Looking for a cable operated pan to pull behind my D8H. Will consider any within a 1000 mile radius of Birmingham,Al. Thanks, Carl Stapleton 404-259-7124:usa
  15. captcws

    D11R/Komatsu 475

    In need of a coal blade for one of these tractors.
  16. captcws

    Komatsu 475 Coal Blade

    In need of a blade for a Komatsu 475 or D11R for pushing coal. Anyone have know of one for sale anywhere?
  17. captcws

    3066 cat

    The 3066 engine is a Mitsuibshi S6KT used in French built machines as per an agreement with the French government as a requirement for any machine made there. I have a 320L with this engine and parts are hard to find when looking outside of a Cat dealer unless you find one burned or parting out.
  18. captcws

    A couple pictures of pond work.

    Pond Just out of curiousity what size where the pictures that you uploaded in resolution size I mean? 900 x 1200, 1600 x 1200 etc. I am trying to upload some also and apparently mine are too big to be accepted so trying to figure out how to reduce them without retaking in a smaller format.
  19. captcws

    Dozer blades

    Most likely because of the type tractor it is on would be general grading, don't think I have ever seen a true 'U' blade, which is a high production type blade for larger tractors( D8, D9,D10), on a D4
  20. captcws

    36" water main across the river

    Thanks Digger those are really great pictures, I wasn't in the business at that time but did the same thing for about 25 years and was THE DIVER as well as the contractor, great memories! Nothing like fumbling around in the dark and cold of a river bottom,LOL!:notworthy
Top