• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. C

    JD 310D backhoe cylinder rebuilding Questions

    Put penetrating oil on the nut last night. Today I used a brass drift with a sledge hammer. Worked !!. I sure I will have more questions when the kit comes. Thank you all for the help.
  2. C

    JD 310D backhoe cylinder rebuilding Questions

    Yes it's the outside nut. Not much of a welder. Wish I could find a US made spanner. I will cover the rod with metal. I check the rods on the three that are leaking they all have some nicks . Great idea covering the up. Thank you.
  3. C

    JD 310D backhoe cylinder rebuilding Questions

    I am trying to remove the gland nut of the stabilizer cylinder. I have a Williams hook spanner wrench. I bent it but the nut didn't break loose. I used a hammer and punch went around the the nut no go. I heated the nut slightly didn't break loose. I only have a 20 gallon air compressor so a air...
  4. C

    Case 580d engine question

    I just changed the water pump. I guess the coolant was leaking out the weep hole on the Pump, the fan air blasted it everywhere. I could see a water mark when the pump was removed. The hole in the housing assembly is drilled through both chambers for whatever reason. Thanks for all the posts.
  5. C

    Trouble identifying hydraulic hose fittings

    My local hydraulic shops do not have them. McMaster Carr doesn't have them Still looking. Thanks for all the replies!
  6. C

    Trouble identifying hydraulic hose fittings

    Thanks for the information. Do you know anyone that sells caps and plugs for these fittings?
  7. C

    Trouble identifying hydraulic hose fittings

    I have a JD 450C ,I need to remove the ripper. The two lines from the Ripper control valve are 1/2 ID ? they go into a tee and 3/8 lines go to the two cylinders. I need caps and plugs for the larger lines.I don’t know the name of the fittings to get the correct Caps and plugs. The two male line...
  8. C

    Case 580d engine question

    The parts manual shows the hole , the maintenance manual shows the same hole. All the ones I saw one line p/n A152802 all have the same hole. On my housing the hole is slightly eroded. Don't get it! Thanks for your replies
  9. C

    Case 580d engine question

    This is the body assembly with the at 8 o’clock
  10. C

    Case 580d engine question

    Even the parts manual shows the hole.
  11. C

    Case 580d engine question

    Yes the water pump has a weep hole . The hole I am referring to is in the body assembly that the water pump bolts to. The body assembly mounts to the head an has both radiator hoses connected to it. I would think the area is full of coolant, why the hole? The shaft seal would leak out of the...
  12. C

    Case 580d engine question

    After rebuilding the engine, I had a slight water leak under the water pump. I removed the water pump and the gasket was soaked with coolant. Can anybody tell me why the body assembly - water pump has a hole drilled through it . I am going to change the pump but don't understand the passage...
Top