-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Search results
-
B
Komatsu D31a-16
I can probably get more left tilt but at least I can get to work with this thing now. After the angle cylinder adjustments. That's my wife on the machine. Thanks Simon -
B
Komatsu D31a-16
Simon, I tested the cylinders as you said and no oil is leaking by. I then followed the procedure to reduce the length of the angle cylinders by opening the large bolt (I didn't know that was a bleeder) and the two square head bleeder bolts on both angle cylinders. I tilted right and angled left... -
B
Komatsu D31a-16
Simon, were you able to adjust your angle cylinder length using the bleeding procedure posted? I read that Plug 1 is actually a large bolt head (maybe 1 1/4") I didn't realize that was a bleeder. I was opening the small 1/4" square headed plugs. I'm going to try that procedure again today. -
B
Komatsu D31a-16
OK, next fairly warm day I'm going to do the By Pass test Simon C recommended (above) and will try the bleed procedure again. This tilt problem is the only thing left to fix before I can use this machine. Been working on it for a month. I will post the results here. Thanks for all the info guys. -
B
Komatsu D31a-16
Thanks for getting back to me. I believe all the components on this machine are original. Only 2900 hours on the clock. The major complaint is that the blade will not tilt left. The tilt cylinder travels full stroke in and out but because the tilt rod is pointing almost straight forward it will... -
B
Komatsu D31a-16
Tinkerer, thanks for telling me how to add a video. I'm old and not in good health so I appreciate the advice. Just trying to get this machine working correctly so I can help my son out on his property. Bob -
B
Komatsu D31a-16
OK, I added a video to you tube. I'll see if I can list it here. It shows the angle cylinders not retracting all the way. The blade is pitched forward not allowing the tilt rod to push the blade to the left. If the blade was held back by the angle cylinders it would push to the left. angle/tilt... -
B
Komatsu D31a-16
Simon, The angle rams do seem to extend out all the way but do not retract all the way on either side. I wish I could post this video. The tilt cylinder works fine, travels both ways to the limit. I have no way to pressure test the cylinders. I think I can rebuild these angle cylinders fairly... -
B
Komatsu D31a-16
OK, shot a video. It shows the angle cylinders do not retract all the way. They seem to extend all the way, left and right. You can see how the angle cylinders keep the blade pitched forward not allowing the angled tilt rod to tilt the blade to the left. I don't know how to adjust the angle... -
B
Komatsu D31a-16
I'm going to take a video of the blade in motion so you can see what it does. That might explain what's happening. I appreciate everybody's help with this. Bob -
B
Komatsu D31a-16
Thanks for getting back to me. The only way to set the blade forward angle is to adjust the length of the angle cylinders when they are straight (both evenly extended, blade straight). Newer machines have a straight bar from the C frame to the back of the blade that is adjustable. That keeps the... -
B
Komatsu D31a-16
I haven't tried that but if the angle cylinders won't retract all the way I don't think that will affect their motion? I don't know. I can tell you, if the angle cylinders are disconnected from the blade and the blade is tilted back where I think it should be it will tilt left and right. I... -
B
Komatsu D31a-16
1978 Komatsu D31A-16 Ser. # 25743 Yes, I am cleaning up the machine and used "Cub Cadet Yellow" for paint. These angle cylinders will not retract all the way. They stay out 6 to 8" on both sides. The opposite side does extend out all the way. It pushes the blade forward instead of holding the... -
B
Komatsu D31a-16
Well, I think I've tried everything. I still have no tilt to the left. I believe the angle cylinders are out too far and is pushing the blade forward (trying to bend the tilt rod). I angled the blade left and right. The cylinders do not retract all the way and are longer than the required 760 to... -
B
Komatsu D31a-16
Did this angle adjustment procedure work for you? I am having a "no tilt to the left" problem with my D31A-16 and will try this trick to adjust the angle cylinders. I believe the angle cylinders are pushing the blade forward too much to allow the blade to tilt left. -
B
Komatsu D31a-16
The tech has not come out from Wilmington, NC yet. I've done a lot of other needed work while waiting for him. It wasn't charging, a new alternator cured that. I ordered new headlights (24V LED's). Took the spring covers off and cleaned and adjusted the tracks. Ordered new filters, although the... -
B
Kamatsu D31 tilt blade bleeding
No, the tilt control lever is part of the lift lever. Forward and back is up and down and left and right is tilt left and right. The angle lever is a separate lever to the right of the lift lever. No push button. This is a 1978 D31A-16 2500 series. It's in great shape other than this no tilt to... -
B
Kamatsu D31 tilt blade bleeding
Did you ever find out how to bleed the angle cylinders? I'm having the same problem on my 1978 D31A now.