• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. LCA078

    D6c blade tilts

    That's a tough one. I don't have good ideas for you if you're sure the threads are stripped. I have seen a turnbuckle welded up on an old rake to keep it from turning but there was also really no need to adjust it anyway since it was a rake.
  2. LCA078

    Kudos to the mods

    It's not just the s-word they're dealing with (it's the s-word that got asterik'd out in post #1), but the Administrators and Moderators do a great job of policing up out of line comments. I've seen posts disappear with inappropriate content so it's more than just keeping out the riffraff, it's...
  3. LCA078

    Cat D3B Leaking hydaulic oil into the engine oil?

    And that’s a good reason why checking all the fluids before every use is important. Even if only for a couple hours.
  4. LCA078

    Keep blowing cylinder.

    Two options: 1) Install crossover/pressure relief valve. 2) Install a higher PSI cylinder I'm not mentioning a third option of fixing your drivers. While I agree they could do a better job, the truth is they won't and never will. You fire one and you'll just hire another one that will do the...
  5. LCA078

    Cat D6C ID

    I didn't realize that would be a 977...much bigger than the D6C. Depending on what you want to do with a machine, the 977 might be a better choice (depending on mechanical condition obviously). What are your plans for a piece of old yeller iron?
  6. LCA078

    Cat D6C ID

    It's a loader. Not sure which one...931, 941, 955, etc. Someone here will be able to tell which one.
  7. LCA078

    Are new machines too complex?

    Regarding feedback, do operators prefer feedback in way that the controls transmit a portion of the attachment force back to you so you "feel" how hard the bucket is digging? Or do you mean you want more friction or spring force built into the control system so it requires a bit more deliberate...
  8. LCA078

    Cat D6C ID

    After sitting for so long, I would bar the engine over by hand a few rotations to ensure it's free before you give it the juice. Even the slightest bit of fluid (antifreeze, oil, water, etc.) in the cylinders may scrap your machine in the first revolution of the starter with two new batts. I...
  9. LCA078

    D6c blade tilts

    Do you mean the threads on the end of the cylinder rod are stripped? Take a pic and post- much easier to advise when we can see the damage.
  10. LCA078

    Are new machines too complex?

    I don't think so either. We've gone past, waaaayyy past, the ability for typical person with reasonable intelligence to comprehend today's computer controlled systems without special tools or training. Toss on top that it will be practically impossible to find the electronic parts, sensors...
  11. LCA078

    Cat D6C ID

    Would it be wise for him to find a stamped serial number somewhere? Since he's only a couple miles away, it would be fairly easy to spend time on it. And when taking pics, look for an engine tag or post some clear pics of the engine itself. The folks here are pretty good identifying engines...
  12. LCA078

    315BL hydraulic issues

    I think all the sensors are separate wirings so not sure how one would affect the other but it sounds like it did for @heymccall
  13. LCA078

    Cat D6C ID

    Cat's website is a bit picky on how serial numbers are entered. Add a zero after the 10k prefix like this: 10K05142. That should pop up parts in SIS. I can see parts but I cannot see your Build As configuration. Maybe someone has deeper access than me. And best of luck getting her to run...
  14. LCA078

    315BL hydraulic issues

    The wires for my hydraulic tank fluid level sensor also broke at the epoxy. Must be from shaking/wiggling as the harness was not attached to the hanger and was just flopping around. I remember I took pics of it and finally found them. I also remember testing the circuit with a paperclip to...
  15. LCA078

    Kudos to the mods

    Just wanted to give a note of appreciation to the moderators on keeping the spammers out of HEF. Within only a few mins of seeing a post about ******* or other junk, the post is gone. I'm sure there are many spam posts that I don't see because of the fast actions of the mods. The mods are...
  16. LCA078

    Shantui Dozers

    Yeah, probably so. But that's not always a good thing. Maybe trying to sound less Chinese I understand but there also are so many Korean and Japanese brands that represent high quality I think it may work against them to sounds less Korean.
  17. LCA078

    Shantui Dozers

    Yup, when I hear DEVELON, that is exactly, word for word, going through my mind. I love corporate execs when they rename a company...
  18. LCA078

    315BL hydraulic issues

    The three red lights on the bottom indicate in order from left to right: hydraulic oil level is low, engine oil level is low, and engine coolant level is low. I would quickly verify you have correct levels every startup by physically looking at dipsticks and levels, otherwise, you risk...
  19. LCA078

    USED CATERPILLAR PONY PARTS

    The only other place I'd recommend listing parts like these is for sale on eBay. It's a bit cumbersome and buyers can be overly needy, but eBay does cast a very wide net.
  20. LCA078

    1994 cat d5c xl series iii dozer basket case

    There are also a few sketchy websites that sell downloads for much cheaper. I don't endorse any of them and have no connection but I've gotten the random odd manual for fairly cheap without issue. Just google exactly what you asked for: "cat d5c xl series iii dozer manual download" and roll...
View older results
Top