born2ride
Well-Known Member
Can i press off this end?
Those are not pressed on. When new they slide on and a snap ring is placed at the end of the shaft. Does your's have a snap ring. After 50 or so years the collar is usually stuck on. You should be able to take a hammer and tap (hit) on it until it comes loose. The correct way to take them off is to pull them off. With one bolt hole broken it will be more difficult. Hold the collar and press on the shaft by pushing it out of the collar.
It's going to be cheaper to buy an new roller then fix that one. Looks like it's a Berco roller and you'll probably never find a collar for it.