• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

komatsu pc150-lc no start

S

sdd1369

New Member
Joined
Feb 7, 2016
Messages
2
Location
new hampshire
Hello i am in need of some help, we have a pc150lc-6k with a 4cyl cummins We did not use it for afew weeks and now will not start now. It will fire of starter fluid so we changed all filter still the same. Now we have changed out the fuel shutdown solenoid. its sounds like like it wants to fire but just wont. I do not know were togo from here and any help would be great
ser# k30786
thank you
 
John C.

John C.

Senior Member
Joined
Jun 11, 2007
Messages
12,870
Location
Northwest
Occupation
Machinery & Equipment Appraiser
Did you check the air filter? When you turn the key on does the monitor panel show an alternator light flashing?
 
S

sdd1369

New Member
Joined
Feb 7, 2016
Messages
2
Location
new hampshire
yes i did check the air filter seemed fine, but i also did try it with the filter off. I didnt notices a alternator light on but i can check that in the am
thank you
 
ITAMECH61

ITAMECH61

Member
Joined
Jan 31, 2016
Messages
24
Location
venezuela
Hi sdd1369 may be the problem is compression when you have a used engine that no works for a few weeks in humid place. the pistons rings goes to glued by the humidity of the air caught in the cylinders. try to start the engine whit a spray lubricant put in the admision and start the engine at idle velocity
 
You must log in or register to reply here.
Top