• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Case 580B - Water In Crankcase

Liebherrman

Member
Joined
Nov 23, 2015
Messages
21
Location
Pa..
Maybe you will be ok, i would pull the oil pan and see which cyl.it is leaking from so you can give that one a good exam.Also i know this is a long shot but was it doing this before the water pump & rad. change ?

Yea I had an engine with coolant in oil ,and I pulled the oil pan, pressurized the cooling system alitle , and found the coolant leaking around the sleve and block at lower oring.I just serviced that one cylinder, that was 8 years ago, still going strong
 

LORNE

New Member
Joined
Jan 10, 2016
Messages
1
Location
Quebec canada
Remove injectors,crank engine over for a few seconds, check for coolant coming out of injector bores, if head gasket is your problem coolant will be coming out of at least one of the bores. If not you could remove the oil pan fill cooling system and pressurize the cooling system with 8 or ten lbs and look under to see which cylinder is leaking or somewhere els the coolant is coming from.
 

onemank6

Senior Member
Joined
Jan 29, 2010
Messages
1,175
Location
michigan
So does anyone know where I might find a Case G188D block? I should probably start a new thread with just that question hey?[/QUOTE
Gary if your still looking for a block try tractorstuff.com Dale is the owner and he has some ck's and b's in his scrap yard and has acess to all kinds of parts he ships parts all over and is very smart with these tractors.I have been buying parts from him for my ck and he is very fair on his prices and goes out of his way to help people..his # is 765-378-3396
 
Top