• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by zerocool302

  1. Z

    289c cooling fan help??

    My fan is hooked up just like the photo above.
  2. Z

    289c cooling fan help??

    It is 7.1 when I check it.
  3. Z

    289c cooling fan help??

    I have a 289c that has been back and forth between the dealer for the past 3 months. Originally there was a hydraulic problem where the lift arms would go all the way up as soon as you started it and wouldn’t move at all even moving the controls. After the dealer replaced the pump, complete...
  4. Z

    Cat 289c aftermarket radio help.

    I got it figured out, thanks for all the help!!!
  5. Z

    Cat 289c aftermarket radio help.

    My serial number is cat0289cvjmp02372. I looked at the electrical schematic on my service disk but it shows different colors than what wires are on my radio. Could someone help me out please?
  6. Z

    Cat 289c aftermarket radio help.

    I have a 289c with a factory radio that’s dead. I want to put an aftermarket radio in it to replace the factory one. I have searched and I’m confused. I know you can hardwire an aftermarket head unit but is there an adapter you can use to just plug into the factory harness so you don’t have...
  7. Z

    cat 289c high flow jumper help!!

    Thank you so much for your help. Also is there an adapter to go from the cat plug to the plug bobcat attachments use?
  8. Z

    cat 289c high flow jumper help!!

    Cat0289cvjmp02372
  9. Z

    cat 289c high flow jumper help!!

    I have a 289c with high flow and i have searched here to find out what jumper plug part number i need but im haveing problem figuring out which one it is. I have seen at least 3 different part number so i dont want to buy the wrong one. I am just trying to run a high flow brush cutter on my...
See more
Top