• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by wolf44

  1. W

    Kubota SVLs

    I have an SVL 75 with cab heat and air full stereo love it, . SVL75-2 Specification download(pdf/639KB) Model SVL75-2 Type of operator station Open CAB / Closed CAB Engine Model V3307-CR-TE4 Gross HP HP (kW)/rpm 74.3 (55.4)/2400 Displacement cu.in. (cc) 203.3 (3331) Cylinders 4 Bore...
  2. W

    Help!

    buy new! that should not be repaired. looks like a bad heat treat and possibly bad material. just my 2 cents worth. any of the drag racing axle makers can make that for you in grat materials and a fair price.
  3. W

    Skid Steer attachment Plate Drawing

    Is there anyway you could email that to me at cad@amk-mfg.com
  4. W

    Skid Steer attachment Plate Drawing

    need a engineering drawing so I can laser cut the parts. I can reverse engineer but if someone had a drawing it would be faster.
  5. W

    Cat Skid Steer 289D ATTACHMENTS v BOBCAT - careful!

    Jerry when I hooked my cat blade on my Kubota SVL-75 I had to make my own wiring harness. I just jumpered everything one solenoid at a time till I got the controls all working correctly. If you look at my post dozer blade issues you can see what I had to do. two of the solenoids had to be wired...
  6. W

    Skid Steer attachment Plate Drawing

    Any one out there got an Skid Steer attachment Plate Drawing. From bobcat or Kubota. ???? Thanks
  7. W

    Dozer Blade Hookup Issues

    You have a cat Bade like mine ??? How do you control the auxiliary hydraulics ???
  8. W

    Kubota 14 pin to 7 pin bobcat

    go to http://www.skidsteersolutions.com and buy a connector and rewire. It's what I did when I got my SVL75
  9. W

    Dozer Blade Hookup Issues

    Thanks Tags: Now if it will stop raining in Atlanta for more than 5 minutes I will give it a try.
  10. W

    Dozer Blade Hookup Issues

    Got it working !!!! What I had to do was put power to both solenoids at the same time tied to the left joy stick right button. The back solenoid is the diverter and the front one is the tilt control valve. to make it work you push and hold the left joy sticks right button and work the right joy...
  11. W

    Dozer Blade Hookup Issues

    We have tried to power the solenoids, no problem there, but what you have is NO flow to the valves. It seems that I need a diverter valve. where I can swap the flow from the blade angle cylinders to the tilt cylinder. the only hitch in this plan is that it seems that Cat is using hydraulic...
  12. W

    Dozer Blade Hookup Issues

    What, I am the only one with a dozer blade ??? Anybody ???
  13. W

    Dozer Blade Hookup Issues

    I could use you guys help once again. This time I have a skid steer dozer blade I am trying to hook up and can’t seem to understand how to do it . First off it’s a cat 6 way dozer blade going on a Kubota SVL-75. Standard hydraulic hook up with an electrical control hookup that I believe it...
  14. W

    KX121-3 Breaking Bucket Pins

    If you want to stop the problem have a pin made from S7 tool steel and heat treat to 55 RC and double draw and case harden the surface .015 deep to 65 rc. When I redid my thumb on my KX this is what I did and it's bomb proof. I would not remove the grease hole in the center of the shaft. what I...
  15. W

    Kubota svl 75 or 90 owners out there?

    Just got and SVL-75 For deer camp with a bush hog and cab air . Let me say I love it!!! strong well built. did a lot of reasearch before buying. Since I use it in the woods and the swamp a lot the slide up front door is a must. The SVL-75 is also not as tall as the T-135-t230 and you could get...
See more
Top