• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by wlas

  1. W

    international loadstar 1600

    Looking for front drum, I've called every place I can think of and can not find a drum for my loadstar 1600. just need one that is turnable Larry
    • wlas
    • Thread
    • Replies: 0
    • Forum: Trucks
  2. W

    case 530 ck

    Thank you for the diagram, this is some thing I have to start on right away I AM USING THE MACHINE almost every day , pretty soon he EPA is going to come after me with the oil all of the ground
  3. W

    case 530 ck

    What is the trick to removing the swing cylinder pin op my case 32 hoe. both my swing cylinder are leaking bad , I need to replace the seals in both and what seals do I need? I've been putting hyd fiuld in like every day iam starting to get a collection of 5 gal buckets of hyd fuild
  4. W

    case 530 ck

    Thanks for the heads up on the swing cylinders, I overhauled my engine the winter before last and this winter is hyd leaks, this machine just keeps going and going with cylinders leaking and all. I've been working it 8 and 10 hour days all summer and now winter is coming so it's even more, gets...
  5. W

    case 530 ck

    My 530 does a lot of the same things your does, It's getting old dumping hyd oil in. This winter I am going to change the seals in my swing cylinders, Have you had to do that ?
  6. W

    188D Sleeve Renoval

    This site has been great help, I am going to get a Delco from Napa and the reg. off of ebay . Is there any way to get a tach to work without a cable ?
  7. W

    188D Sleeve Renoval

    Thanks for the help on the Alt. do I have to build an adapter to mount it to the power steering pump , which has 5/16 bolts and distance between them is different than most alternators.
  8. W

    188D Sleeve Renoval

    I Haven't been back on to show my progress, So I finished putting the Head back on after the machine shop rebuild it, I replaced one cylinder and piston, honed and replaced the rings on the others, I pulled all the sleeves and replaced the O-rings, put it all back together and it runs like new...
  9. W

    188D Sleeve Renoval

    I used dish soap and it worked good. The sleeve went right in with no problem , Thanks for all the help so far and I will post as the work continues .
  10. W

    188D Sleeve Renoval

    I am going to install the cylinder liners, after pulling all of them and inspecting. What do you use for a lub on the o-ring for installation ? I keep hearing don't use an oil base type and use soap or something like that.
  11. W

    188D Sleeve Renoval

    Well I Got the sleeve out by building a puller just like the one in the picture above. melben thanks for the trick to getting the gasket between the timing cover and the head, I has wondering what to do about that. I marked all the head bolts so they will go right back in the holes they came out...
  12. W

    188D Sleeve Renoval

    Thanks for the help, I am going to make a puller. Here are some pictures of the head with the valve gone and the sleeve with a groove in it and also the piston, which needs to be replaced. I took the head over to a shop and they are going to call and let me know what it's going to cost to...
  13. W

    188D Sleeve Renoval

    Does anyone have a trick to removing the cylinder sleeves, I tried to drive one out from the bottom with no luck. The engine is in the tractor, is there a tool I can build ? I had a valve head break off at the stem and beat up the piston and now I need the get the sleeve out and replace it and...
  14. W

    Case 580b Injector problems

    What's the best way the do a compression test and what type tester does it take for a 188D ?
  15. W

    Trick to remounting Backhoe on Case 530CK

    Thanks for the help, I when back and used the boom and bucket and was able to push the hoe right into the tractor, had it ready to work in a few minutes and was back to digging.
See more
Top